Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Thru-beam sensor ML29-P/59/102/143-Y807709

ML29-P/59/102/143-Y807709
  • Miniature design
  • Ideal for installation in door profiles or frames
  • Dark-On switching
  • Supplied with connection cable

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  ML29-P/59/102/143-Y807709

Tuotekuvaus
Thru-beam sensor
General specifications
Effective detection range0 ... 1.5 m
Threshold detection range2.5 m
Light sourceIRED
Light typemodulated infrared light , 880 nm
Opening angleemitter +/- 3 °
Optical facelateral
Ambient light limit40000 Lux
Indicators/operating means
Function indicatorLED red in receiver : lights up when receiving the light beam
Electrical specifications
Operating voltage11 ... 30 V DC
No-load supply currentEmitter: ≤ 20 mA
Receiver: ≤ 10 mA
Input
Test inputemitter deactivation at +UB ≤ 5 V DC
Output
Switching typedark-on
Signal output1 NPN output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 0.1 A
Switching frequency100 Hz
Response time5 ms
Conformity
Product standardEN 60947-5-2
Compliance with standards and directives
Standard conformity
StandardsEN 61000-6-2, EN 61000-6-3
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-20 ... 75 °C (-4 ... 167 °F)
Relative humidity90 % , noncondensing
Mechanical specifications
Degree of protectionIP65
Connection4-pin plastic connector, 6.5 mm diameter
Material
HousingPMMA , black
Optical facePlastic pane
Massper device 120 g
Dimensions
Height85.2 mm
Width11.6 mm
Depth9.2 mm

Classifications

SystemClasscode
ECLASS 13.027270901
ECLASS 12.027270901
ECLASS 11.027270901
ECLASS 10.0.127270901
ECLASS 9.027270901
ECLASS 8.027270901
ECLASS 5.127270901
ETIM 9.0EC002716
ETIM 8.0EC002716
ETIM 7.0EC002716
ETIM 6.0EC002716
ETIM 5.0EC002716
UNSPSC 12.139121528

Details: ML29-P/59/102/143-Y807709

Function

The narrow miniature thru-beam sensors are a small and cost-effective solution, fitting in virtually any door frame. The ML29 and ML30 series offer fast, reliable detection at a distance of up to 8.5 m. The sensors are easy to mount on the profile, either using adhesive strips or a screw. A large opening angle ensures problem-free alignment. Several sensors can be mounted in a cross formation to offer multi-beam protection.

Informative Literature: ML29-P/59/102/143-Y807709

Language Selection:
We are sorry, there are no documents for your language selection. Please select another language.

Product Documentation: ML29-P/59/102/143-Y807709

Language Selection:
Brief InstructionsKieliTiedostotyyppiTiedoston koko
Instruction leaflet / BeipackzettelALLPDF141 KB

Design / Simulation: ML29-P/59/102/143-Y807709

Language Selection:
CADKieliTiedostotyyppiTiedoston koko
3-D model emitter / 3-D-Modell SenderALLSTP73 KB
CAD 3-D additional / CAD 3-D additionalALLSTP73 KB
CAD Portal / CAD PortalALLLINK---

Approvals: ML29-P/59/102/143-Y807709

Language Selection:
Declaration of ConformitySertifikaatin nroKieliTiedostotyyppiTiedoston koko
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2230DALLPDF229 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6934ALLPDF225 KB

Liitännäistuotteet: ML29-P/59/102/143-Y807709

Accessories
Front plate for thru-beam sensors in series ML29 fa
R10x and R20x series photoelectric sensors

For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...

ML100 Photoelectric Sensor

Whether glass, solar wafers or printed circuit boards: The photoelectric sensors of the ML100 series are precisely tailored to meet the requirements of various complex detection tasks. Learn more about the portfolio and find the ideal sensor for your application ...