Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Ethernet-APL Rail Field Switch ARS12-B2-IC16-2

ARS12-B2-IC16-2
  • Managed Ethernet-APL field switch for process industries
  • Powered spur ports intrinsically safe Ex ic according to 2-WISE and FISCO
  • PROFINET MRP and S2 redundancy
  • 2 ports each for 1000BASE-T and SFP transceivers
  • Redundant power input 20 VDC ... 60 VDC
  • Installation in Zone 2
  • Physical layer diagnostics at the spur
  • Configuration and diagnosis with web interface, PROFINET device functions and SNMP
  • Support of network security

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  ARS12-B2-IC16-2

Tuotekuvaus
Ethernet-APL rail field switch with 16 intrinsically safe Ex ic spur ports and spring terminals
General specifications
Design / MountingCabinet installation
Supply
Rated voltage20 ... 60 V
Rated current0.6 ... 1.8 A
Power dissipation18.3 W
Voltage difference dual supply input+/- 10 %
Power consumptionmax. 36 W
Redundancydual supply input
Ethernet Interface
RedundancyPROFINET MRP , PROFINET system redundancy S2
Indicators/operating means
LED PWR A/Bgreen: power on
LED LNK/CHKOff: no communication link active
green: communication link active
green flashing: communication activity
red flashing: check function
LED STATUSOff: Good
Blue: Maintenance required
Red flashing: Out of specification
Red: Failure
Fault signalVFC alarm 100 mA, 32 V DC, normally closed
ButtonDevice reset
Interface 1
Interface typeEthernet-APL : 1 Vpp option spur connection
Port classificationS P C C
Number of ports16
Port identificationS 1 ... S 16
Power optionpowered
Transfer rate10 MBit/s fullduplex
Rated voltage11.61 V
Rated current95 mA
Rated power1.11 W
Connection typepluggable spring terminals
Conductor cross section solid wire2.08 ... 0.326 mm2 , 14 ... 18 AWG
Conductor cross section flexible wire2.08 ... 0.326 mm2 , 14 ... 18 AWG
Interface 2
Interface type1000BASE-T
Number of ports2
Port identificationP 1 ... P 2
Transfer rate10/100/1000 Mbps
Connection typeRJ-45 , EIA/TIA 568 B
Interface 3
Interface typeSlot for SFP transceiver SFP Multi-Source (MSA) compliant
Number of ports2
Port identificationP 3 ... P 4
Galvanic isolation
Spurs/Supply1500 V AC
SFP/Supply500 V AC
1000BASE-T/Supply1500 V AC
1000BASE-T/Spurs1500 V AC
1000BASE-T/1000BASE-T1500 V AC
Housing/All620 V AC
Fault signal/All1500 V AC
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013
Conformity
Galvanic isolationIEC 61010-1
Electromagnetic compatibilityEN 61326 , NE 21
Degree of protectionIEC 60529
EthernetIEEE 802.3z , IEEE 802.3u , IEEE 802.3cg
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Climatic conditionsDIN IEC 721
Software
Industrial protocolsPROFINET
ManagementWeb user interface , SNMP v1, v2 , v3 , PROFINET
RedundancyPROFINET MRP , PROFINET system redundancy S2
Management Information Base (MIB)PROFINET conformance class B
SafetyHTTPS , Port locking
Diagnostics function10BASE-T1L physical layer , port , Packet statistics
Ambient conditions
Ambient temperature-40 ... 70 °C (-40 ... 158 °F) horizontally mounted no SFP installed
-40 ... 65 °C (-40 ... 149 °F) horizontally mounted SFP installed
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity≤ 95 % non-condensing
Shock resistance15 g 11 ms
Vibration resistance1 g 10 ... 150 Hz
Pollution degreemax. 2, according to IEC 60664
Corrosion resistanceacc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Housing materialstainless steel 1.4301 , PC (Polycarbonate)
Housing width173 mm
Housing height158 mm
Housing depth136.5 mm
Degree of protectionIP20 according to EN 60529
Mass2920 g
MountingDIN rail mounting , wall mounting
Data for application in connection with hazardous areas
EU-type examination certificateTÜV 20 ATEX 8571 X
MarkingEx-Hexagon II 3 G Ex ic ec nC [ic] IIC T4 Gc
Ex-Hexagon II (3) D [Ex ic Dc] IIIC
Supply
Maximum safe voltage60 V
Interface 12-WISE power source
Voltage Uo17.5 V
Current Io105 mA
Interface 2
Maximum safe voltage Um60 V
Interface 3
Maximum safe voltage Um60 V
Directive conformity
Directive 2014/34/EUEN 60079-0:2018 , EN 60079-11:2012 , EN 60079-15:2015 , IEC TS 60079-47:2021
International approvals
IECEx approvalIECEx TUR 20.015X
Approved forEx ic ec nC [ic] IIC T4 Gc
[Ex ic Dc] IIIC
Certificates and approvals
PatentsThis product may be covered by the following patent: US 9,762,409
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 11.019170104
ECLASS 10.0.119170104
ECLASS 9.019170104
ECLASS 8.019170104
ECLASS 5.119030102
ETIM 8.0EC001478
ETIM 7.0EC001478
ETIM 6.0EC001478
ETIM 5.0EC001478
UNSPSC 12.143222608

Documents: ARS12-B2-IC16-2

ManualsKieliTiedostotyyppiTiedoston koko
ManualENGPDF12764 KB
Software ManualENGPDF8236 KB
HandbuchGERPDF11910 KB
Software-HandbuchGERPDF3742 KB
Instruction manuals
ИнструкцииBULPDF156 KB
Návod k poużitíCZEPDF150 KB
Instruktions manualDANPDF148 KB
Instruction manualENGPDF149 KB
KasutusjuhendESTPDF144 KB
KäyttöohjeFINPDF144 KB
Manuel d'instructionsFRAPDF151 KB
BetriebsanleitungGERPDF151 KB
Οδηγίες χρήσηςGREPDF159 KB
HandleidingHOLPDF150 KB
Instruction manual / BetriebsanleitungHRVPDF148 KB
Használati útmutatóHUNPDF150 KB
Manuale di istruzioniITAPDF209 KB
Instrukciju vadovasLITPDF151 KB
Instrukcja obsługiPOLPDF151 KB
Manual de instruçõesPORPDF151 KB
Manual de utilizareRONPDF150 KB
ИнструкцииRUSPDF155 KB
Navodila za uporaboSLVPDF147 KB
Manual de instruccionesSPAPDF150 KB
Product information
End-user software license agreement (EULA) Pepperl+Fuchs Discovery and Configuration Tool (PFDCT)ENGPDF24 KB
Ethernet-APL Rail Field SwitchENGPDF2169 KB
Ethernet-APL Field SwitchGERPDF2179 KB

CAD+CAE: ARS12-B2-IC16-2

CADTiedostotyyppiTiedoston koko
3-D model / 3-D-ModellSTP27812 KB

Approvals+Certificates: ARS12-B2-IC16-2

Statements of complianceSertifikaatin nroTiedostotyyppiTiedoston koko
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-5087APDF81 KB
Certificates
Europe TUV Rheinland ATEX Category 3 G ATEX Category (3) DTÜV 20 ATEX 8571 XPDF173 KB
TUV Rheinland IECEx ec IECEx Certificate of ConformityIECEx TUR 20.0105XLINK---

Software: ARS12-B2-IC16-2

Device type managersJulkaisutiedotTiedostotyyppiTiedoston koko
DTM Collection FieldConnex / DTM-Kollektion FieldConnex1.7.1.2159ZIP35245 KB
Software Tools
Pepperl+Fuchs Discovery and Configuration Tool (PFDCT) / Pepperl+Fuchs Discovery and Configuration Tool (PFDCT) 2.3.0.273ZIP4728 KB

Liitännäistuotteet: ARS12-B2-IC16-2

Accessories
Separation wall for intrinsically safe port application (packaging unit: 2 pieces), Designed for use with Ethernet APL rail field switchespa
Wall mounting kit consisting of 2 mounting brackets, designed for use with Ethernet APL rail field switchpa
Protective covers for SFP sockets (packaging unit: 10 pieces)pa
Protective covers for RJ45 sockets (packaging unit: 10 pieces)pa
SFP Module Multimode, 2 KM, 100BASE-FX, SFP-1, 100BASE-FX Fast Ethernet multi-mode fiber SFP, Certified for use with Ethernet-APL switches in Zone 2, Class 1 laser product complies with EN 60825-1, SFP Multi-Source Agreement compliant, Ethernet link up to 2 kmpa
SFP Module, Multimode, 550 M, 1000BASE-SX, SFP-2, 1000BASE-SX Gigabit Ethernet multi-mode fiber SFP, Certified for use with Ethernet-APL switches in Zone 2, Class 1 laser product complies with EN 60825-1, SFP Multi-Source Agreement compliant, Ethernet link up to 550 mpa