Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291
Not available for purchase

Stationary read device ODT-MAC433-LD-WH-MC

  • 30 scans per second
  • All common 1-D or 2-D codes can be read
  • Integrated error image memory
  • VGA output
  • High passage speed
    10 m/s

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Lataa koko tietolomake PDF-tiedostona:

Ote tietolomakkeesta: Tekniset tiedot  ODT-MAC433-LD-WH-MC

Stationary multicode read device for all common 1-D, 2-D and Pharmacodes at speeds of 10 m/s, angled line of sight, VGA resolution, Ethernet, VGA output, RS 232 interface
General specifications
SymbologiesMaxi Code, PDF 417, Data Matrix, QR Code, MicroPDF 417, GoCode, UCC Composite, Aztec Code, Code 39, Code 128, UPC, EAN, JAN, Int 2 of 5, Codabar, Code 93, UCC RSS, POSTNET, PLANET, Japanese Post, Australia Post, Royal Mail, RM4SCC, KIX Code, Codablock, Pharmacode
Read distance60 ... 200 mm Depending on code symbology
Reading fieldmax. 110 mm x 70 mm
Modul sizemin. 0.2 mm
Electrical specifications
Operating voltage24 V DC ± 15% , PELV
No-load supply currentmax. 250 mA
Power consumption6 W
Physical Ethernet
Transfer rate100 MBit/s
Cable lengthmax. 30 m
Interface 1
Interface typeRS 232
Transfer rate9600 Bit/s ... 115200 Bit/s
Cable lengthmax. 30 m
Cable lengthmax. 30 m
Output 1
Output typeVideo output, RGB (75 Ohm), 1 Vpp
ResolutionVGA, 800 x 600 pixels
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 61326-1 , EN 61000-6-4
Standard conformity
Noise immunityEN 61326-1
Emitted interferenceEN 61000-6-4
Degree of protectionEN 60529
Laser classIEC 60825-1:2007
Ambient conditions
Ambient temperature0 ... 45 °C (32 ... 113 °F)
Storage temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protectionIP65
Connection8-pin, M12x1 connector, standard (supply+IO) 5-pin, M12x1 socket, standard (IO) 4-pin, M12x1 socket, standard (LAN) Video: 7-pin socket
Housingpowder coated diecast zinc
Massapprox. 760 g

Documents: ODT-MAC433-LD-WH-MC

ManualsKieliTiedostotyyppiTiedoston koko
Short instructions, safety information
Quick Start Guide ODT-MAC431-*-WH-MC/ODT-MAC433-*-WH-MCENGPDF2398 KB
Kurzanleitung ODT-MAC431-*-WH-MC/ODT-MAC433-*-WH-MCGERPDF2465 KB


CADTiedostotyyppiTiedoston koko
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS16984 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP5499 KB
CAD Portal / CAD PortalLINK---

Liitännäistuotteet: ODT-MAC433-LD-WH-MC

Female cordset, M12, 8-pin, shielded, PUR cablefa
Male cordset, M12, 5-pin, shielded, PUR cablefa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa

Function: ODT-MAC433-LD-WH-MC

The stationary reader is a reading system for the recognition of data matrix codes. With a powerful signal processor and optimized decoding algorithms, the device delivers delivers extremely high reading speeds.

The configuration is easy and comfortable via the standard Ethernet interface using a standard web browser or via serial port.

The device is supported by an VGA video output. In addition, the device has an integrated error image memory.

Typical operative range of stationary readers are:

- Document handling - Printing machines - Identification in packaging and warehousing technology - Detection of PCBs