Hinweis: Alle produktbezogenen Dokumente, wie Zertifikate, Konformitäts- oder Herstellererklärungen, die unter der Firmierung Pepperl+Fuchs GmbH oder Pepperl+Fuchs AG herausgegeben wurden, gelten auch für die Pepperl+Fuchs SE.
Vollständiges Datenblatt als PDF herunterladen:
Produktbeschreibung |
---|
The 7500-ACC-BKT bracket provides easy installation of the 7500-01 control unit to an enclosure, with or without 5500-MAN manifold (not included). |
General specifications | ||
---|---|---|
Operating mode | For mounting 7500 control unit to enclosure or back panel | |
Series | 7500 | |
System | Type Z Purge ; Ex pzc Purge | |
Hazardous environment | gas or dust | |
Mechanical specifications | ||
Degree of protection | Mounting type 4X / IP66 (Seeloc washers) | |
Material | Bracket: 316 stainless steel Panel: 316 stainless steel Hardware, panel-to-enclosure (Bag 1) Bolts (3): 304 stainless steel Washers (3): Seeloc by APM Hexseal (P/N 75082 Buna-N) Nut: 304 stainless steel Hardware, bracket-to-panel (Bag 2) Bolts (2):304 stainless steel Washers (2): Hard fiber Nuts (2): 304 stainless steel |
|
Mass | 7500-ACC-BKT-NM 0.6 kg 7500-ACC-BKT-YM 1.3 kg |
|
Dimensions | For bracket dimensions, see dimension drawing. Hardware, panel-to-enclosure (Bag 1) Bolts (3): ¼ x 20 x ¾" Washers (3): 1" (OD); 9.53mm (hole diameter) Nut: ¼" Hardware, bracket-to-panel (Bag 2) Bolts (2):5mm x 12mm button socket Washers (2): No 8 Nut (2):5mm nyloc nut |
|
General information | ||
Scope of delivery | One (1) each bracket and panel with mounting hardware included (Control unit and optional manifold are sold separately.) |
System | Classcode |
---|---|
ECLASS 13.0 | 27180508 |
ECLASS 12.0 | 27180508 |
ECLASS 11.0 | 27180508 |
ECLASS 10.0.1 | 27180508 |
ECLASS 9.0 | 27180508 |
ECLASS 8.0 | 27180508 |
ECLASS 5.1 | 40050501 |
ETIM 9.0 | EC000243 |
ETIM 8.0 | EC000243 |
ETIM 7.0 | EC000243 |
ETIM 6.0 | EC000243 |
ETIM 5.0 | EC000243 |
UNSPSC 12.1 | 39121301 |
Die 7500-ACC-BKT-... ist für die Montage der Steuerungseinheit 7500-01 (mit oder ohne optionalem Verteilerblock 5500-MAN) seitlich, oben oder unten am Gehäuse konzipiert und sorgt dafür, dass die Steuerungseinheit von der Vorderseite aus gut einsehbar ist. Die Halterung wird für eine einfache Montage mit Befestigungsschrauben, Muttern und Unterlegscheiben vom Typ 4X/IP66 geliefert. Die Halterung kann als eigenständige Montagevorrichtung für die Steuerungseinheit 7500-01 oder als Befestigungslösung für die Steuerungseinheit 7500-01 mit montiertem Verteilerblock 5500-MAN-CD01, 5500-MAN-EX01 oder 5500-MAN-CDUL-01 bestellt werden. Steuerungseinheit und Verteilerblock sind nicht im Lieferumfang enthalten.
Literature | Sprache | Dateityp | Dateigröße |
---|---|---|---|
Brochure - Bebco EPS® 5500 | ENG | 1159 KB |
CAD | Sprache | Dateityp | Dateigröße |
---|---|---|---|
CAD 2-D / CAD 2-D | ALL | ZIP | 273 KB |
CAD 2-D / CAD 2-D | ALL | ZIP | 193 KB |
CAD 3-D / CAD 3-D | ALL | STP | 134 KB |
CAD 3-D / CAD 3-D | ALL | STP | 80 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|