Cartoning machines may experience jams during operation The VOC industrial event camera enables real time monitoring to identify the root cause of the problem ... Event Camera The VOC industrial event camera monitors cartoning machines at distances from 0.5 m to more than 10m, allowing reliable detection of recurring failures. The industrial event camera has an integrated circular buffer to record up to 60 seconds ...
Explore the Pepperl+Fuchs knowledge base to learn more about the electrical connections of inductive sensors ... Residual current 1.5 mA Operating current 5 mA ... 500 mA Direct-Current Voltage 8 V DC Sensor type NAMUR, N, 1N, SN, S1N EN 60947-5-6 Wiring diagram according to EN 60947-5-2 NC contact or NO contact Example: NC contact N/N0 or SN Typical data Rated ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of two-wire sensors ... are marked with the following in the third block of the Pepperl+Fuchs order designation: –SN (switching element function "normally-closed") or –S1N (switching element function "normally-open") Safety sensors of this type are designed for use with safety ...
See Overview: Pepperl+Fuchs offers a wide range of inductive sensors Find the right product for your application! ... of the sensor, the control interface unit or the common power line the output of the control interface unit will automatically switch into the safe "off" condition. These sensors are identified by SN or S1N after the identification. The safety function can only ...
Explore the FAQ in the Pepperl+Fuchs knowledge base to learn more about fault repairs for inductive sensors ... systems, the probability of a dangerous failure is PFH = ʎ du . In SIL considerations from Pepperl+Fuchs for NAMUR sensors (N) and NAMUR sensors with safety function (SN), detectable dangerous failures ʎ dd are not included, i.e., ʎ dd = 0. Therefore: PFH ...
1-5/5Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.