Not available for purchase: Distance sensor for positioning tasks accurate to the millimeter, PRT, measuring range up to 50 m, SSI interface - switchable to RS-422, M12 plug, Measuring method PRT (Pulse Ranging Technology), Active dynamic control, Switchable SSI/RS 422 interface, Non-contact precision measurement, Ultra-fast data acquisitionfa
Not available for purchase: Distance sensor for positioning tasks accurate to the millimeter, PRT, measuring range up to 50 m, SSI interface - switchable to RS-422, M12 plug, low-temperature version, Measuring method PRT (Pulse Ranging Technology), Version for low temperature applications, Non-contact precision measurement, Switchable SSI/RS 422 interface, Ultra-fast data acquisitionfa
In hazardous areas it is a challenge to print a label or document during operation The 6500 series purge and pressurization system make it possible ... -consuming software adjustments are a thing of the past. Printers in an airtight enclosure filled with air or an inert gas are installed in an explosion-free zone. If the pressure inside the printer enclosure is at least 50 Pa (~0.5 mbar) higher than ...
In autonomous transport, the direction of travel and the side areas of AGVs must be monitored in order to avoid any collision with people and objects The USi-safety ultrasonic sensor systems reliably ... response time: 99 ms Safety rating compliant with EN ISO 13849, category 3 PL d Temperature range –30 °C … +50 °C The Benefits The actual sensors are separated from the control interface and can be flexibly positioned with minimum space requirements ...
Learn how automated guided vehicles (AGVs) can precisely orientate and navigate with the help of photoelectric sensors ... , for reflectors up to 200 m Time stamp on the measurement data to facilitate synchronization High scan rate of 50 Hz for high-speed applications The Benefits An exact time stamp in the measurement data and a measured-data filter enable the device to be adapted ...
Pepperl+Fuchs offers an ultrasonic sensor system according to EN ISO 13849 category 3 PL d for safe navigation of AGVs in warehouses ... : typically 91 ms Safety rating: in accordance with EN ISO 13849 category 3 PL d Operating temperature: -30 °C … +50 °C At a Glance The only ultrasonic sensor system to keep personnel safe Safety approval for use according to EN ISO 13849 category 3 PL d ...
Pepperl+Fuchs offers an ultrasonic sensor for safe operation of automated guided transport systems in hospitals ... 13849 category 3 PL d Operating temperature: -30 °C … +50 °C At a Glance The only ultrasonic sensor system to keep personnel safe Safety approval for use according to EN ISO 13849 category 3 PL d Elliptical sound field with an opening angle of ±17 ...
The R2300 multi-layer scanner for 3D object detection and collision avoidance ensures the reliable navigation of autonomous vehicles for intralogistics Learn more about the R2300 3-D LiDAR sensor ... (10%) Measuring rate: 50 kHz Scanning angle: 100° Scan rate: 25/12.5 Hz Angular resolution: 0.1° Distance measurement accuracy: 30 mm (1 sigma) Measuring rate: up to 4,000 pixels per scan The Benefits A compact housing design ensures that the 3-D ...
Pepperl+Fuchs' F260 Series ultrasonic sensors are used to detect fill levels in a gravel silo ... such as sand, crushed rock, and gravel . These materials are excavated at depths of up to 50 m and must be appropriately stored until they can be transported from the site. Conveyor belts transport the construction materials to silos. Ultrasonic sensors ...
The ENA58IL series magnetic rotary encoders convinces with high resolutions and an accuracy of <01° Get to know the new benchmark for industry standard rotary encoders! ... encoder, with its accuracy of 0.1°, provides exact position data for the precise positioning of the bottles. Newspapers move at a speed of around 50 meters per second through offset presses. The movement of the press rollers has to be exactly matched ...
Explore the Pepperl+Fuchs knowledge base to learn more about the output types of inductive sensors ... the output connection to the supply voltage of the sensor when switched. The load is connected between the PNP output of the sensor and ground L-. Note: Sensors with PNP output tend to be used more frequently to prevent short circuits to ground. Example ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of two-wire sensors ... , Pepperl+Fuchs offers two-wire sensors that have a particularly low residual current. Example: NBB10-30GS50-Z4L-V1. The "L" in the output name stands for low current. "Closed" Operating State In the "closed" operating state, the switching element ...
51-60/74Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.