Not available for purchase: Sensing range up to 10 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 2-radial design, Beam spacing 500 mm, Red transmission light, Integrated function display, Operating reserve indication, Operation on control units of SB4 (SafeBox), Performance level (PL): PL e, Connection: M16 cable gland , terminal compartmentfa
Not available for purchase: Sensing range up to 10 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 2-radial design, Beam spacing 500 mm, Red transmission light, Integrated function display, Operating reserve indication, Operation on control units of SB4 (SafeBox), Performance level (PL): PL e, Connection: M16 cable gland , terminal compartmentfa
Not available for purchase: Sensing range up to 10 m, 2-radial design, Beam spacing 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Usable with or without start/restart disable, Integrated relay monitor, 7-segment diagnostic display, Operating mode: Start/restart disable, relay monitor,, Performance level (PL): PL e, Safety output: 2 separated fail safe semiconductor outputs, Connection: M16 cable gland , terminal compartment with cage-terminals, M12-connector for emitterfa
Not available for purchase: Sensing range up to 10 m, 2-radial design, Beam spacing 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Usable with or without start/restart disable, Integrated relay monitor, 7-segment diagnostic display, Operating mode: Start/restart disable, relay monitor,, Performance level (PL): PL e, Safety output: 2 separated fail safe semiconductor outputsfa
Not available for purchase: Sensing range up to 10 m, 2-radial design, Beam spacing 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Usable with or without start/restart disable, Integrated relay monitor, 7-segment diagnostic display, Operating mode: Start/restart disable, relay monitor,, Performance level (PL): PL e, Safety output: 2 relay outputs, force-guided NO-contactfa
Not available for purchase: Sensing range up to 10 m, 2-radial design, Beam spacing 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Usable with or without start/restart disable, Integrated relay monitor, 7-segment diagnostic display, Operating mode: Start/restart disable, relay monitor,, Performance level (PL): PL e, Safety output: 2 relay outputs, force-guided NO-contact, Connection: M16 cable gland , terminal compartment with cage-terminals, M12-connector for emitterfa
Not available for purchase: Sensing range up to 10 m, 2-radial design, Beam spacing 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Usable with or without start/restart disable, Sequential and parallel muting in various operating modes, Emergency muting for the correction of the material jam, Operating mode: Start/restart disable, relay monitor, muting operating modes, Performance level (PL): PL e, Safety output: 2 separated fail safe semiconductor outputsfa
Not available for purchase: Sensing range up to 10 m, 2-radial design, Beam spacing 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Usable with or without start/restart disable, Sequential and parallel muting in various operating modes, Emergency muting for the correction of the material jam, Operating mode: Start/restart disable, relay monitor, muting operating modes, Performance level (PL): PL e, Safety output: 2 separated fail safe semiconductor outputsfa
Not available for purchase: Sensing range up to 10 m, 2-radial design, Beam spacing 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Usable with or without start/restart disable, Sequential and parallel muting in various operating modes, Emergency muting for the correction of the material jam, Operating mode: Start/restart disable, relay monitor, muting operating modes, Performance level (PL): PL e, Safety output: 2 relay outputs, force-guided NO-contactfa
Not available for purchase: Sensing range up to 10 m, 2-radial design, Beam spacing 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Usable with or without start/restart disable, Sequential and parallel muting in various operating modes, Emergency muting for the correction of the material jam, Operating mode: Start/restart disable, relay monitor, muting operating modes, Performance level (PL): PL e, Safety output: 2 relay outputs, force-guided NO-contactfa
Self-driving cleaning robots are increasingly being used in office buildings and shopping centers They must never collide with obstacles, so even transparent surfaces must be detected Ultrasonic sen ... or NPN)/ 2 switching outputs (both PNP or both NPN)/ 1 analog output (current or voltage) Synchronizable IP67 degree of protection The Benefits Ultrasonic sensors are designed to be extremely rugged and reliable . Obstacle detection by ultrasonic sensors ...
See Overview: Pepperl+Fuchs incremental rotary encoders meet the requirements of a wide range of applications, whether standard, offshore, safety or heavy-duty application ... Incremental rotary encoders record a certain number of pulses for each shaft revolution. Counting the pulses or measuring the period duration provides information about the speed and angle of the shaft . 2-channel incremental rotary encoders with 90 ...
Hydrogen plays an important role in the measurements to curb climate change Discover products and solutions that ensure safe automated processes along its value chain! ... , for use in industry and heavy-duty transport. Hydrogen has a decisive advantage here: its combustion does not produce any climate-damaging CO 2 emissions, only water vapor. But hydrogen is not automatically climate-friendly. To produce the energy carrier in a climate ...
Pepperl+Fuchs offers a comprehensive portfolio of industrial sensor technology for the automated production of PV wafers, PV cells and PV modules Learn more ... during production, testing and sorting, Pepperl+Fuchs offers a wide range of solutions for optical identification . For example, the code readers of the VOS-Ident series are ideally suited for this task: they read all common 1-D and 2-D codes with high ...
Hydrogen plays an important role in the measurements to curb climate change Discover products and solutions that ensure safe automated processes along its value chain! ... to fossil fuels are needed, for example, for use in industry and heavy-duty transport. Hydrogen has a decisive advantage here: its combustion does not produce any climate-damaging CO 2 emissions, only water vapor. But hydrogen is not automatically climate ...
Asynchronous motors or generators require high-precision speed control For such applications, Pepperl+Fuchs has expanded its portfolio of hollow shaftrotary encoders with the ENI90 series Discover ... conditions: the rotary encoders feature an insulated drive shaft for high dielectric strengths of up to 2 kV, high shock and vibration resistance , and EMC circuit protection that ensures maximum system availability. As a robust heavy-duty rotary encoder, the ENI90HD ...
Pepperl+Fuchs' rotary encoders are used to slow and control the speed of a process, resulting in increased efficiency ... . The scope of the categories applies here to the applicable EU standards listed under the new Machine Directive 2006/42/EC, as well as functions according to IEC 61800-5-2 applied to drive technology. Safety-relevant drive functions guarantee safe, economical ...
Pepperl+Fuchs' SmartRunner Matcher offers the ideal solution for checking the position of plastic trays in ready-meal production The solution comprises a light section sensor with a highly precise la ... and unambiguous results . The solution is not dependent on contrast in any way , and instead detects the height profile of the target object. The height profile can be taught in instantly at the touch of a button; the SmartRunner Matcher is then ready for use. 2-D ...
Plants, products, and systems are becoming increasingly networked Learn more about OPC UA and how the Pepperl+Fuchs IO-Link Master standardizes information exchange in Industrial Communication ... For the first time, Pepperl+Fuchs has incorporated OPC UA into IO-Link masters and is now introducing the ICE 2 (EtherNet/IP) and ICE3 (PROFINET) master series in addition to the ICE1 masters that are used for PLC-based systems and time-critical applications ...
The Digital Products and Services online portal of the Pepperl+Fuchs brand ecom combines automated staging with mobile device management and a real-time monitoring function on a single platform Learn ... promptly. The two tools eDIAGNOSTICS and eANALYTICS (from 12/2020) are available for this purpose. Learn more Device Status Information eDIAGNOSTICS is used to create and release complete or user-defined reports that can be forwarded to ecom support ...
411-420/433Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.