See Overview: HART multiplexers give you digital access to the configuration and diagnostic data of your HART field devices without influencing the processing of measured values ... See Overview: HART multiplexers give you digital access to the configuration and diagnostic data of your HART field devices without influencing the processing of measured values. ...
See Overview: Pepperl+Fuchs offers an extensive range of AS-Interface I/O modules for IP 20 enclosure applications and junction boxes as well as IP67 modules for harsh field mounted installations ... or round cables if another lower section is used. The G4 module can be mounted on DIN mounting rails or screwed on directly. G2 flat modules G2 flat modules G2 modules are easy to connect and replace in the event of a fault. The modular system can ...
See Overview: FieldConnex Segment Coupler (SK1) from Pepperl+Fuchs connects one PROFIBUS PA segment to PROFIBUS DP SK1 has all components built into one small housing, which is mountable on a DIN-Rail, Power Rails or wall mounted ... FieldConnex® Segment Coupler (SK1) connects one PROFIBUS PA segment to PROFIBUS DP . SK1 has all components built into one small housing, which is mountable on a DIN-Rail, power rails or wall mounted. Different models exist for safe areas ...
See Overview: Pepperl+Fuchs’ fieldbus power supplies include basic power supplies that provide power to single fieldbus segments Our fieldbus power supplies are ideal for small installations or test ... Basic Power Supplies The basic power supplies provide power to single segments. The power supplies are built into 20 mm wide housings, which snap on the DIN-Rail or power rail. Through the power rail, they can be connected to redundant bulk power ...
See Overview: Pepperl+Fuchs’ PROFIBUS PA power supplies include the Power Hub This modular, motherboard-based power supply system is used for one to four PROFIBUS PA segments ... service life . Together with the small foot print, this Power Hub provides the highest segment count per control cabinet reducing foot print and thus saving all associated effort and expenditure . The motherboard is designed for DIN rail installation. All ...
See Overview: K-System isolated barriers from Pepperl+Fuchs help solve a wide range of applications in one system K-System intrinsic safety barriers guarantee a reliable & economical signal transmis ... feed modules The Power Rail is an insert in the standard 35mm DIN rail. When mounting on the DIN rail, the units are simply snapped in place. The Power Rail supplies the modules with power and provides a path for the collective error message ...
The Ethernet advanced physical layer defines switched architecture Communications are robust as cross talk between instruments is impossible, which has a long-lasting positive effect on availability ... -APL rail field switch for DIN rail mounting. The Ethernet-APL field switch for Zone 1 / Div. 2 installation receives power from the trunk. It connects APL spurs to the trunk. Outputs are intrinsically safe, supporting connections into Zone 0 / Div. 1 ...
See Overview: Pepperl+Fuchs signal conditioners take signals from field instruments and convert those signals into standard instrument signals ... See Overview: Pepperl+Fuchs signal conditioners take signals from field instruments and convert those signals into standard instrument signals... ...
See Overview: Pepperl+Fuchs offers zener barriers (zener diode barriers) for cost saving explosion protection in process automation systems Zener barrier housing and connection styles include DIN rail, termination board mounted, and a full range ... -rail Grounding directly connected with DIN-rail Separation of field loop by removing the fus Z-system zener barriers are available with high density up to 2 channels / 12,5 mm width. Variants with field replaceable fuses provide a convenient means ...
See Overview: The K-system Power Rail is a 35 mm DIN rail with gold-plated inlays Gold-plated connectors on the modules snap onto the Power Rail This eliminates point-to-point connections & provides a path for the collective error message ... See Overview: The K-system Power Rail is a 35 mm DIN rail with gold-plated inlays. Gold-plated connectors on the modules snap onto the Power Rail. This eliminates point-to-point connections & provides ...
11-20/79Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.