Add-In for PACTware, For all sensors with IO-Link interface, Automatic detection of the connected USB-IO-Link master and IO-Link sensor, Independent PACTware poject setup and connection to the IO-Link sensor with just one double-clickfa
Not available for purchase: 1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V ... 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 30 V DC, Type: 2-wire connection, Type [2]: 3-wire connection, Type [3]: 4-wire connection, Field device: resistance thermometerpa
Not available for purchase: 2-channel isolated barrier, 24 V DC supply (bus powered), Thermocouple, RTD or potentiometer input, Usable as signal splitter (1 input and 2 outputs), Linearized output 4 mA ... 20 mA, sink/source or 1 V ... 5 V, Sensor breakage detection, Configurable by PACTware, Line fault detection (LFD), Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 18 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20.4 ... 30 V DC bus powered via Termination Boardpa
Not available for purchase: 1-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, voltage or current input, 2 relay contact outputs, Programmable high/low alarm, Configurable by PACTware, Sensor breakage detection, Housing width: 20 mm, Number of channels: 1-channel, Trip relay, Programmable high/low alarm, Rated voltage: 19 ... 35 V DC, Field device: resistance thermometer, Field device [2]: Thermocouple, Signal: 0/2 ... 10 V, Signal [2]: 0/4 ... 20 mA, Type: 2 x relay (change-over contact)pa
Not available for purchase: 1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, voltage or current input, 2 relay contact outputs, Programmable high/low alarm, Configurable by PACTware, Sensor breakage detection, Housing width: 20 mm, Number of channels: 1-channel, Trip relay, Programmable high/low alarm, Rated voltage: 19 ... 35 V DC, Field device: resistance thermometer, Field device [2]: Thermocouple, Signal: 0/2 ... 10 V, Signal [2]: 0/4 ... 20 mA, Type: 2 x relay (change-over contact)pa
Not available for purchase: 1-channel isolated barrier, 24 V DC supply (Power Rail), Strain gauge input (full or half bridge), Output 0 mA ... ± 20 mA or 0 V ... ± 10 V, 2 relay contact outputs, Programmable high/low alarm, Configurable by PACTware or keypad, RS-485 interface, Low response time, Line fault detection (LFD), Housing width: 40 mm, Number of channels: 1-channel, Trip relay, Rated voltage: 20 ... 35 V DC, Field device: strain gauge bridge, Type: 2 x relay (change-over contact), Signal: 1 x -20 ... 20 mApa
Not available for purchase: 1-channel signal conditioner, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V ... 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 30 V DC, Field device: resistance thermometer, Field device [2]: Thermocouple, Field device [3]: potentiometer, Line fault detectionpa
Not available for purchase: 2-channel isolated barrier, 24 V DC supply, Thermocouple or RTD input, Current output 0/4 mA ... 20 mA, Configurable by PACTwarepa
Not available for purchase: 1-channel isolated barrier, 24 V DC supply (bus powered), Thermocouple, RTD or potentiometer input, Linearized output 4 mA ... 20 mA, sink/source or 1 V ... 5 V, Sensor breakage detection, Configurable by PACTware, Line fault detection (LFD), Housing width: 18 mm, Number of channels: 1-channel, Rated voltage: 20.4 ... 30 V via Termination Boardpa
See Overview: PACTware software from Pepperl+Fuchs is the open, manufacturer & fieldbus independent user interface for plantwide operation of devices, systems & communication interfaces With PACTware, plant devices can be quickly ... PACTware integrated the FDT interface. FDT (Field Device Tool) is the standard for unification of the interface between device and user interface. FDT quickly integrates device operation Idea becomes reality With PACTware the devices of a plant can ...
See Overview: Pepperl+Fuchs offers a collection of device and communication DTMs for the parameterization of devices for interface technology, level measurement, corrosion monitoring, remote I/O syste ... See Overview: Pepperl+Fuchs offers a collection of device and communication DTMs for the parameterization of devices for interface technology, level measurement, corrosion monitoring, remote I/O syste ...
Learn more about offline parameterization of IO-Link devices with the help of the manufacturer- and fieldbus-independent operating software PACTware ... Installation, Commissioning, and Parameterization Offline Parameterization of IO-Link Devices Using PACTware The manufacturer - and fieldbus-independent operating software PACTware with IODD interpreter makes it easy to parameterize and interpret IO ...
See Overview: Browse and download Pepperl+Fuchs software for our factory automation or process automation products ... See Overview: Browse and download Pepperl+Fuchs software for our factory automation or process automation products… ...
See Overview: IO-Link configuration and integration is easy with uniform device description files, standardized IO Device Descriptions (IODDs), and parameter-setting with the help of software tools L ... diagnostic capabilities . This transparency down to the field level lays the foundation for predictive maintenance . PACTware for Offline Parameterization With the help of the cross-vendor and cross-fieldbus operator software PACTware , IO-Link devices ...
1-5/26Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.