Explore the Pepperl+Fuchs knowledge base to learn more about the electrical connections of inductive sensors ... contact Z/Z0 Typical data Basic series 5 V/4 mA … 100 mA Standard series 4 V/2 mA … 200 mA Residual current 0.7 mA/0.5 mA Basic Series 10 V ... 30 V, 100 mA Standard Series 10 V ... 60 V, 200 mA Sensor type 3-wire E/E0, E1, E2, E3, E5, E8 Short-circuit ...
... . This blind distance must be avoided. - 30 30 = 30 mm big thread G G = thread S S = stainless steel 60 60 = 60 mm usable thread length - E2E2 = three-wire, DC, PNP, no contact - V1V1 = M12 x 1 device plug for DC sensors Description of the First Section ...
Explore the FAQ in the Pepperl+Fuchs knowledge base to learn more about fault repairs for inductive sensors ... connected to type 1 inputs. Type 2: Digital inputs for two-wire sensors. This input type is suitable for signals from semiconductor switches, e.g., two-wire sensors according to the standard for proximity sensors (IEC 60947-5-2). These inputs have an ...
See Overview: Pepperl+Fuchs offers field units and redundant field units for our FB Zone 1 remote I/O systems ... 316L stainless steel and features slots for 24 double-width or 48 single-width I/O modules in an 800 x 1000 x 300 mm enclosure. It is suitable for use in a -20 °C … +40 °C temperature range (depending on power supply) and a rated voltage of 24 V DC/115 ...
See Overview: Pepperl+Fuchs offers remote I/O field units for Zone 2 explosion-hazardous areas ... redundant and non-redundant variants for fieldbus and power supply connection. They are suitable for use in a -20 °C … +40 °C temperature range. Experienced project engineers in our Solution Engineering Centers (SEC) are ready to support you on your way to a ...
Explore the Pepperl+Fuchs knowledge base to learn more about special types of inductive sensors ... range of up to -50 °C ... +100 °C can be used as output stages. Double Sensors for Open Assembly Double Sensors from the -F25 Product Family The -F25 sensor product family offers open solutions for position feedback, especially of manually operated ball ...
Data Matrix encodes characters in the form of a bit sequence The actual size of the code depends on many independent factors These include the quantity of data, type of data and the printing techniq ... 4.2mm x 4.2mm 3.3mm x 3.3mm 2.1mm x 2.1mm 12x12 10/6 a) b) c) 5mm x 5mm 4mm x 4mm 2.5mm x 2.5mm 14x14 16/10 a) b) c) 5.9mm x 5.9mm 4.6mm x 4.6mm 3mm x 3mm 16x16 24/16 a) b) c) 6.7mm x 6.7mm 5.3mm x 5.3mm 3.4mm x 3.4mm 18x18 36/25 a) b) c) 7.6mm x 7.6mm ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of three-wire sensors ... type with digital current output –EP = sensors with push-pull output Sensors of type –E are available in the following switching element functions: NPN, normally-open (E0, formerly E) NPN, normally-closed (E1) PNP, normally-open (E2) PNP, normally ...
See Overview: Pepperl+Fuchs’ completely plastic explosion-protected Ex de plugs and sockets can be used in hazardous areas to connect and disconnect circuits safely and easily The devices meet all th ... switching capacity up to 125 A. Due to low contact resistance, the devices require a low insertion and removal force. This allows them to be unplugged quickly and easily. Sockets Pepperl+Fuchs sockets, available in 2-, 3-, 4- and 5-pole versions, have full ...
The VisuNet RM Shell 5 is the latest generation firmware for VisuNet Remote Monitors ... VisuNet RM Shell RM Shell 5 Features NEW! RM Shell to Go Control Center Highlights Contact us Maximizing security. Creating transparency. Increasing efficiency. VisuNet RM Shell 5 for Thin Client Operator Stations VisuNet RM Shell 5—Smart HMI ...
1-10/280Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.
+49 621 776-0