... distance must be avoided. - 30 30 = 30 mm big thread G G = thread S S = stainless steel 60 60 = 60 mm usable thread length - E2 E2 = three-wire, DC, PNP, no contact - V1V1 = M12 x 1 device plug for DC sensors Description of the First Section 1. Operating ...
RFID in the high-frequency range (HF) offers an effective solution for load detection, especially for smaller bots Learn how the RFID system offers a targeted and reliable detection, even under diff ... frequency: 13.56 MHz Complies with ISO 15693 Compact housing (80 × 28 × 12 mm) Rugged design Temperature range: –25 °C … +70 °C Degree of protection: IP67 Can be mounted on metal The Benefits The IQH1-F61-V1 read/write head is especially rugged and very ...
See Overview: Our Pepperl+Fuchs Bebco EPS 1000 series Type Z purge system is suitable for Class I, Division 2 to non-hazardous area applications & Class II, Division 2 to non-hazardous area applicatio ... : Class II Enclosure Volumes ≤ 50 ft3 1001C : Class II Enclosure Volumes ≤ 250 ft3 1002 : Class I Enclosure Volumes ≤ 15 ft3 1003 : Class I Enclosure Volumes ≤ 75 ft3 1004 : Class I Enclosure Volumes ≤ 200 ft3 1005 : Class I Enclosure Volumes ≤ 450 ft3 11 ...
See Overview: Our Pepperl+Fuchs Bebco EPS 2000 series, Type Y purging system is an automatic system that will purge and pressurize the protected enclosure and maintain pressure within the enclosure ... Enclosure Volumes ≤ 50 ft3 1001C : Class II Enclosure Volumes ≤ 250 ft3 1002 : Class I Enclosure Volumes ≤ 15 ft3 1003 : Class I Enclosure Volumes ≤ 75 ft3 1004 : Class I Enclosure Volumes ≤ 200 ft3 1005 : Class I Enclosure Volumes ≤ 450 ft3 11 : Class I ...
Explore the Pepperl+Fuchs knowledge base to learn more about the ambient conditions of inductive sensors ... at the following maximum values: Sensors with "T" marking in the type designation: ≤ +100 °C Sensors with "150", "200", or "250" marking in the type designation: maximum operating temperature in each case in °C. For extremely low temperatures, there is no code ...
Bebco EPS portfolio provides reliable safety for Zones and Divisions applications, with a full range of Type X,Y, Z, Ex px, and Ex pz Each system has been designed and engineered with a user-friendly ... 1 to Division 2 Type Z system certified for Class I, Division 2 to nonhazardous area Enclosure volume up to 7.1 m 3 (250 ft 3 ) 1000 Series Manual Type Y & Z purge and pressurization system for hazardous gas or dust applications NFPA 70, NFPA 496 ...
The compact inductive safety sensors enable functional safety in direction detection for the control systems of automated guided vehicles (AGV) Learn more about the application and the sensors that m ... is required. Detection is not affected by dust or dirt . Technical Features Example for NSN4-12GH45-2E2-V1-M1-S2D2: No dead band Can be used with standard metal activators Approvals: Category 2, PL d/SIL 2, E1 LED for switch states and fault indicator OSSD interface TÜV ...
Visit Pepperl+Fuchs’ press room for press releases, media kits and other information about industrial sensors and explosion protection ... Factory Automation) In this press kit: At LogiMAT, Pepperl+Fuchs will present its expanded IO-Link portfolio with the IUT-F191-IO-V1 UHF RFID device, you will also read about the pallet detector that can be flexibly adapted to the conveyor system ...
See Overview: Pepperl+Fuchs offers com units for our LB Zone 2 remote I/O systems ... protocols (PROFIBUS DP / DP-V1, MODBUS RTU, MODBUS TCP) and connect the internal bus of the mounting backplane to the higher-level bus system. Additionally, they support all standard I/O modules and are ideal for safe signal transmission between control side ...
See Overview: Com units for PROFIBUS and MODBUS RTU - Connect Remote I/O to Control System/ PLC/ PC ... (PROFIBUS DP / DP-V1, MODBUS RTU, MODBUS TCP) and feature Ex e terminals for end-to-end bus connection between mounting backplanes and higher-level process control. Additional safety barriers are unnecessary. This reduces planning effort and minimizes errors ...
11-20/36Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.