Explore the Pepperl+Fuchs knowledge base to learn more about the electrical connections of inductive sensors ... are available in the Pepperl+Fuchs accessories range. Inductive sensors with these connection options have one of the following type designations at the end of the type code: V1, V3, V5, V13, V16, V18. Other Connections In addition to other versions, e.g ...
By installing standard sensors in special Ex d housings, the components can also be used easily and safely within ATEX/IECEx Zones 1/21 or 2/22 ... the same features as the IQH1-FP-V1 (precise reading, interoperability with various bus types, tags from a single source). On the other hand, this component designed for the UHF frequency range offers additional advantages. Fast, multitag reading enables ...
See Overview: Pepperl+Fuchs offers a complete line of AS-Interface inductive sensors (proximity switches) ... a VariKont M Can be connected via a terminal compartment like an FP Screw-on F design, with 2 m round cable Position sensors F25 series with circuit board design for installation in an enclosure. Connection via plug-in terminals F31 series for direct ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of two-wire sensors ... independent Like Z0, but different plug pinout Z4 Normally-open, reverse polarity protected Voltage drop ≤ 3.8 V Z4L Normally-open, reverse polarity protected Like Z4, but less residual current Z5 Normally-closed, reverse polarity protected Voltage drop ...
Explore the Pepperl+Fuchs knowledge base to learn more about the housing designs of inductive sensors ... (housing design ID80). Example of a typical application: Due to the large operating distances, the robustness, and the mounting concept, the flat pack (FP) is frequently found in amusement park rides. But the flat pack can be used wherever large operating ...
See Overview: Pepperl+Fuchs offers com units for our LB Zone 2 remote I/O systems ... for different industrial communication protocols (PROFIBUS DP / DP-V1, MODBUS RTU, MODBUS TCP) and connect the internal bus of the mounting backplane to the higher-level bus system. The com units support all standard I/O modules and are ideal for safe signal ...
See Overview: Com units for PROFIBUS and MODBUS RTU - Connect Remote I/O to Control System/ PLC/ PC ... industrial communication protocols (PROFIBUS DP / DP-V1, MODBUS RTU, MODBUS TCP) and feature Ex e terminals for end-to-end bus connection between mounting backplanes and higher-level process control. Additional safety barriers are unnecessary. This reduces ...
... distance must be avoided. - 30 30 = 30 mm big thread G G = thread S S = stainless steel 60 60 = 60 mm usable thread length - E2 E2 = three-wire, DC, PNP, no contact - V1V1 = M12 x 1 device plug for DC sensors Description of the First Section 1. Operating ...
See Overview: Pepperl+Fuchs offers remote I/O field units for Zone 2 explosion-hazardous areas ... standard fieldbus protocols: PROFIBUS DP/DP-V1 MODBUS RTU MODBUS TCP The durable field unit enclosures are made from glass fiber reinforced polyester or brushed stainless steel and ensure reliable protection of all electric components from harsh ambient ...
See Overview: Pepperl+Fuchs offers field units and redundant field units for our FB Zone 1 remote I/O systems ... is compatible with com units/gateways for all standard fieldbus types (PROFIBUS DP/DP-V1, MODBUS RTU, MODBUS TCP). The enclosures ensure protection of all electronic components from harsh ambient conditions. GRP and electropolished stainless steel are available ...
1-10/18Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.
+49 621 776-0