See Overview: Pepperl+Fuchs offers a broad portfolio of electrical explosion protection equipment for harsh environments and explosion hazardous areas ... See Overview: Pepperl+Fuchs offers a broad portfolio of electrical explosion protection equipment for harsh environments and explosion hazardous areas … ...
Explore the Pepperl+Fuchs knowledge base to learn more about the electrical connections of inductive sensors ... in the Pepperl+Fuchs accessories range. Inductive sensors with these connection options have one of the following type designations at the end of the type code: V1, V3, V5, V13, V16, V18. Other Connections In addition to other versions, e.g., FASTON® connectors ...
Explore the Pepperl+Fuchs knowledge base to learn more about special types of inductive sensors ... Inductive slot sensors with a slot width of 3.5 mm Sensors from the V3 product family: cubic sensors in the standard dimensions of mechanical microswitches Standard DC versions or NAMUR versions with an extended temperature range of up to -50 °C ... +100 °C ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of three-wire sensors ... type with digital current output –EP = sensors with push-pull output Sensors of type –E are available in the following switching element functions: NPN, normally-open (E0, formerly E) NPN, normally-closed (E1) PNP, normally-open (E2) PNP, normally ...
See Overview: The WCS position encoding system includes code rails in polyester laminate or stainless steel ... , the code rail can also be used in electroplating applications. Stainless Steel Code Rail: The stainless steel code rail from Pepperl+Fuchs is corrosion-resistant and can be used in temperatures ranging from -40 °C to 80 °C . They are resistant ...
See Overview: Pepperl+Fuchs offers a wide range of call point for explosion-hazardous areas ... or GRP -40 °C to +55 °C Variants for Ex d or Ex i available Contact your Pepperl+Fuchs representative to learn more about the available options for your application. ...
The next generation of LoRaWAN-based WILSEN sensors from Pepperl+Fuchs now offers even more user-friendliness and parameterization options ... and transferred directly via the Network API Key to message queues in the TTN (The Things Network) and ChirpStack (v3 and v4) IoT platforms. If an IoT platform other than TTN or ChirpStack is used or no Network API Key is available, the HEX code can also be easily ...
Explore the FAQ in the Pepperl+Fuchs knowledge base to learn more about fault repairs for inductive sensors ... ", "V13", "V16", "V18." AS-Interface Identifier "B3" or "B3B" in the third block of the order designation. Example: NBB15-30GM60-B3B-V1 Other connections Sensors with FASTON® connector "V3" ... "V5" or sensors with solder connection etc. ...
Pepperl+Fuchs offers ruggedized incremental rotary encoders for offshore wind power plants ... signal quality. Application-specific customization of the current drivers expands the range of applications in offshore wind power plants. At a Glance Special enclosure coating for high corrosion resistance Extended temperature range from -40 °C …70 °C ...
The WILSEN platform offers three LoRa-based, battery-powered sensor solutions for a wide range of M+O applications ... for this purpose. In this service, downlink payloads can be created as hex codes with just a few clicks and transmitted directly to message queues in the IoT platforms TTN (The Things Network) and ChirpStack (v3 and v4) via the Network API Key. Alternatively ...
1-10/67Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.