Surge Protection Technology for Process Industry from Pepperl+Fuchs ... module can be easily removed and replaced. An interruption of the signal circuit is avoided by the innovative mechanics in the base module. Surge Protection System M-LB-2000 The M-LB-200 0 offers basic features in a compact housing: with a width of just ...
Even under the most adverse outdoor conditions, the F31K2 dual inductive sensor reliably monitors the correct position of valves ... isolated switch amplifiers nor intrinsically safe wiring are required when using these devices. For hazardous areas up to Zone 0/20 , the intrinsically safe NAMUR version of the F31K2 provides the appropriate ATEX and IECEx approvals. This variant ...
A through-beam sensor with a large aperture angle enables robust signal transmission and thus allows the AMRs to reliably transfer material to transfer stations ... and receiver opening angle ensures reliable detection, even if the vehicle is not optimally aligned or if there are vibrations affecting the AMR. Technical Features Thru-beam sensor with sensing range of 0 m to 3 m, no dead band Large light spot (350 mm ...
With the VOC Industrial Event Camera, Pepperl+Fuchs is expanding its industrial vision portfolio The camera allows event-driven video recording up to 60 seconds before and after a trigger signal Get ... . At a standard distance of 2.5 m from the monitoring area and an orientation of 0°/180°, the field of view is 3.0 m x 1.7 m. With the same orientation and 10 m distance to the monitoring area, it is 12.1 m x 6.8 m. In addition to the integrated heating against ...
Whether in machine and plant engineering, conveyor technology or the packaging industry—the universally applicable VOS 2-D vision sensors provide fast and reliable measurement data for precise quality ... illumination, the VOS1000 and VOS2000 vision sensors have a mechanically adjustable focus , which provides measuring ranges from 0 to 1000 mm . The compact cameras master all standard incident light applications. The VOS2000 and VOS5000 sensor C-mount models ...
... light bulbs. At the point in time when they are switched on, light bulbs briefly have a much higher current consumption than during operation. No‑load current (I 0 ) The current received by a sensor with no load connected. Useful operating distance (s u ...
Krifft & Zipsner GmbH supplies printing machines with automated logistics systems at delivery and in feed All operator-accessible points on the machine are monitored with safety light barriers and li ... according to IEC 61496-1 and EN 61508 (SIL3) and supports the emergency stop functions of categories 0 and 1 as well as different muting types. In the event of an error, the error codes of a 7-segment display provide clear service information in connection ...
Explore the FAQ in the Pepperl+Fuchs knowledge base to learn more about fault repairs for inductive sensors ... systems, the probability of a dangerous failure is PFH = ʎ du . In SIL considerations from Pepperl+Fuchs for NAMUR sensors (N) and NAMUR sensors with safety function (SN), detectable dangerous failures ʎ dd are not included, i.e., ʎ dd = 0. Therefore: PFH ...
61-68/68Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.