Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Active infrared scanner AIR30/32-UP-2493

AIR30/32-UP-2493
  • Single-beam light scanner
  • Can be used to monitor both main and ancillary closing edges
  • Closing edge safety on revolving doors and carousel doors
  • Accurate beam alignment thanks to finely bundled light beam
  • Flush-mounted version with front cover, black
  • DC voltage version

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  AIR30/32-UP-2493

Product Description
Single-beam light scanners with finely bundled light beam for monitoring main and ancillary closing edges
General specifications
Detection range min.0 ... 885 mm preset
Light sourceIRED
Light typemodulated infrared light
Diameter of the light spot22 x 22 mm at sensor range 885 mm
Functional safety related parameters
MTTFd1050 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)90 %
Electrical specifications
Operating voltage24 V DC
Output
Switching typelight on (output is active, when background exists and no person in the detection field)
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protectionIP52
ConnectionConnecting cable 500 mm with socket connector (Deutsch), 4-pin
Material
Housingplastic
Optical faceLuran®

Approvals+Certificates: AIR30/32-UP-2493

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-2247APDF184 KB

Associated Products: AIR30/32-UP-2493

Accessories
Mounting frame for sensors in the AIR30 and PROSCAN seriesfa
Frame for mounting AIR30 sensors in suspended ceilingsfa
Protection from adverse effects of weather such as rain, snow, etc.fa

Function: AIR30/32-UP-2493

The sensor is used as an opening impulse sensor for train doors. The fact that it is fitted to the side means that the detection beam crosses the entrance area. The detection range is optimized for doors that are 935 mm to 955 mm wide. The detection range is preset and cannot be modified. This creates a background area above 885 mm in which no detection takes place.

Caution!

The sensor must point towards a background or a wall, otherwise it will not work.