Serviceline Industrial Sensors
Serviceline Explosion Protection

Sensor module, interface DoorScan-I

  • Sensor module for configurable DoorScan® presence sensor
  • Multi-function interface with full operation
  • Complete system supply for the entire system for one door
  • Can also be used to supply the emitter and receiver modules with power
  • Single button commissioning with automatic Teach-in function
  • SIL 2, certified in accordance with DIN 18650/EN 16005
  • Tool-free module mounting using snap-in mechanism
  • Switchable NPN or PNP outputs

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  DoorScan-I

Product Description
Replacement/extension sensor module for installation in the DoorScan® and TopScan sensor profile, multifunction interface module
General specifications
Operating modeBackground evaluation
Functional safety related parameters
Safety Integrity Level (SIL)SIL 2
Performance level (PL)PL d
CategoryCat. 2
MTTFd2716 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)90 %
Indicators/operating means
Function indicatorInterface: Red LED: detection, excess gain, fault code
Yellow LED: teach status
Green LED: blank status
Green LED: DIP switch status
Electrical specifications
Operating voltage24 V DC +/- 20 %
No-load supply current30 mA
Test inputhigh level ≥ 15 V low level ≤ 2 V
Control inputStandby active at U = 11 V DC at 30 V DC
Switching typelight on
Signal outputswitchable NPN or PNP , short-circuit protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Response time≤ 52 ms
≤ 200 ms in boost operating mode
Functional safetyISO 13849-1 ; EN 61508 part1-4
Product standardEN 12978
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-30 ... 60 °C (-22 ... 140 °F)
Mechanical specifications
Mounting heightmax. 3500 mm
Degree of protectionIP54 (iwhen mounted)
Connectionplug strip , 6-pin
Massapprox. 30 g

Documents: DoorScan-I

Instruction manualsLanguageFile TypeFile Size
Manual DoorScan®-1200ENGPDF3350 KB
Manual DoorScan®-1200FRAPDF3361 KB
Handbuch DoorScan®-1200GERPDF3356 KB
Manual DoorScan®-1200ITAPDF3362 KB
Manual DoorScan®-1200SPAPDF3357 KB
Product information
Product information - DoorScan® - Presence sensor for automatic doorsENGPDF977 KB
Produktinformation - DoorScan® - Anwesenheitssensor für AutomatiktürenGERPDF1150 KB

Approvals+Certificates: DoorScan-I

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0115EPDF811 KB
EU TUV Nord EC-Type Exam. Certificate Functional Safety44 205 13 095719PDF2956 KB

Associated Products: DoorScan-I

Connecting cable between hinge side and leading edge side, Connection to interface modulefa
Door transition cable to connect the sensor to the controller, Connection to interface modulefa
Connecting cable for sensor modules, Serves as the internal bus connection for module communication, Ribbon cable, Up to 5 sensor modules can be connectedfa
Cable adapter for configurable DoorScan presence sensor, Adapter for connecting cables (e.g., to glass doors, existing cables), Tool-free module mounting using snap-in mechanismfa
Cable adapter for configurable DoorScan presence sensor, Cable adapter for extending the ribbon cable, Tool-free module mounting using snap-in mechanismfa