Serviceline Industrial Sensors
Serviceline Explosion Protection

Not available for purchase

Retroreflective sensor MLV12-54-LAS-300/76b/95/110

  • Series of sensors in a widely used standard housing
  • Visible red light, pulsed LASER light
  • Precision: high degree of repeatability thanks to small light spot
  • Reliable detection of minimum target sizes > 0.3 mm
  • Resistant against noise: reliable operation under all conditions
  • High level of stability thanks to the metal housing frame

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  MLV12-54-LAS-300/76b/95/110

Product Description
Laser retroreflective sensor for the detection of small parts, small design, polarization filter, 450 mm detection range, laser red light, light/dark on, push-pull output, test input, M8 plug
General specifications
Effective detection range100 ... 450 mm
Threshold detection range5.6 m
Light sourcelaser diode
Light typemodulated visible red light
Polarization filteryes
Laser nominal ratings
Laser class1
Wave length650 nm
Target size> 0.3 mm
Diameter of the light spotapprox. 0.5 mm at detection range 150 mm up to 400 mm
Angle of divergence0.1 °
Functional safety related parameters
MTTFd930 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)90 %
Indicators/operating means
Function indicator2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted
Control elementsrotary switch for light/dark, sensitivity adjuster
Electrical specifications
Operating voltage10 ... 30 V DC
Switching typelight/dark on switchable
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected
Compliance with standards and directives
Standard conformity
Product standardEN 60947-5-2:2007
IEC 60947-5-2:2007
Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Laser classIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Mechanical specifications
Degree of protectionIP67
Connection4-pin M8 metal connector, 90° rotatable
HousingFrame: nickel plated, die cast zinc,
Laterals: glass-fiber reinforced plastic PC
Optical facePlastic pane

Documents: MLV12-54-LAS-300/76b/95/110

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF660 KB

CAD+CAE: MLV12-54-LAS-300/76b/95/110

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS276 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP200 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: MLV12-54-LAS-300/76b/95/110

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0916BPDF185 KB
EU Pepperl+FuchsPF08CERT1242PDF442 KB
US CA UL General PurposeE87056LINK---

Associated Products: MLV12-54-LAS-300/76b/95/110

Mounting bracket for series MLV12 sensorsfa
Mounting bracket for series MLV12 sensorsfa
dove tail mounting clampfa
dove tail mounting clampfa
dove tail mounting clampfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Reflector with Micro-structure, rectangular 82 mm x 60 mm, mounting holesfa
Reflector with Micro-structure, hexagonal 78 mm x 61 mm, mounting holesfa
Reflector with Micro-structure, rectangular 32 mm x 20 mm, mounting holesfa
Reflector with Micro-structure, round ø 21 mm, self-adhesivefa
Reflective tape A4 (297 mm x 210 mm)fa
Reflective tape, cut to sizefa