Serviceline Industrial Sensors
Serviceline Explosion Protection

Not available for purchase

This product has been replaced.Go to replacement product OBG5000-R101-2P1-IO

Retroreflective sensor ML6-54-F/25/115/136

ML6-54-F/25/115/136
  • Precision sensor for standard applications
  • Miniature design with very robust and versatile mounting options
  • Objects can be reliably detected down to 0 mm: no blind zone
  • Small, sharp light spot
  • Rear mounting option for easy mounting without mounting bracket
  • Tamper-proof version with no adjustments

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  ML6-54-F/25/115/136

Product Description
Retroreflective sensor for standard applications, miniature design, polarization filter, 6 m detection range, red light, light on, 2 push-pull outputs, fixed cable
General specifications
Effective detection range0 ... 5 m
Reflector distance0 ... 5 m
Threshold detection range6 m
Reference targetH85-2 reflector
Light sourceLED
Light typemodulated visible red light , 660 nm
Polarization filteryes
Angle deviationmax. ± 1°
Diameter of the light spotapprox. 40 mm at detection range 1 m
Angle of divergence1.7 °
Ambient light limit
Continuous light40000 Lux
Modulated light5000 Lux
Functional safety related parameters
MTTFd980 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Function indicatorLED yellow: switching state ; Stability control
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply current< 20 mA at 24 V DC
Output
Switching typelight/dark on, programmable
Signal output2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 2.5 V DC
Switching frequency1 kHz
Response time500 µs
Conformity
Product standardEN 60947-5-2
Compliance with standards and directives
Standard conformity
Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -2000 Hz, 10 g in each X, Y and Z directions
Approvals and certificates
UL approvalcULus Listed
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-20 ... 75 °C (-4 ... 167 °F)
Mechanical specifications
Housing width13.9 mm
Housing height31.4 mm
Housing depth18 mm
Degree of protectionIP67 / IP69K
Connection2 m fixed cable
Material
HousingABS
Optical facePMMA
CablePUR
Mass50 g

Documents: ML6-54-F/25/115/136

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF509 KB

CAD+CAE: ML6-54-F/25/115/136

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS625 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP202 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ML6-54-F/25/115/136

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0708BPDF87 KB

Associated Products: ML6-54-F/25/115/136

Accessory of
Slit diaphragm can be affixed for detecting very small partsfa
Slit diaphragm can be affixed for detecting very small partsfa
Slit diaphragm can be affixed for detecting very small partsfa
Slit diaphragm can be affixed for detecting very small partsfa
Accessories
Mounting Clampfa
Mounting bracket fa
Mounting bracket fa
Mounting bracket fa
Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa
Reflector, round ø 84 mm, central mounting holefa
Reflector, rectangular 40.5 mm x 60 mm, mounting holesfa
Reflector, rectangular 60 mm x 19 mm, mounting holesfa
Reflective tape 100 mm x 100 mmfa
Reflector, round ø 20.5 mm, self-adhesivefa

Function: ML6-54-F/25/115/136

The ML6 series is characterized by a robust, powerful and standard design in a miniature housing. The housing offers IP67/IP69K degree of protection, a food-grade lens, highly visible LEDs and robust all-metal bushings for mounting. Adjustable and tamper-proof sensors with a double push-pull output are available. The sensors have a high ambient light limit. Reflections from the background are suppressed. The unusually small, sharp light spot and the quick response time offer maximum switching precision on object edges. Clearly visible red light sources facilitates alignment. A high-performance fixed focus background suppressor is a useful feature. The sensors are suitable for precise object detection and open up a wide range of application fields.