Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
K-HM14
| Product Description |
| HART connection cable for master - slave connection |
| Ambient conditions |
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) |
| Relative humidity | 5 ... 90 %, non-condensing |
| Mechanical specifications |
| Connection | |
| Device | 16 x IDC female connector, 14-pin |
| Cable length | 0.45 m |
Classifications
| System | Classcode |
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27242692 |
| ETIM 8.0 | EC002584 |
| ETIM 7.0 | EC002584 |
| ETIM 6.0 | EC002584 |
| UNSPSC 12.1 | 39121008 |
Associated Products:
K-HM14
| Accessory of |
|
|
|
| Connection board for K-System HART Multiplexer, 16-channel, Interface for series connection or parallel connection, Integrated, switchable 220 Ω resistor, Connection via screw terminalspa |
|
|
|
|
| System board for Triconex, HART Termination Board (ETP) for Tricon v10 AI module, For 16-channel AI cards 3700, 3700A, 3703E and 3721, 16-channel, Field side: pluggable screw terminals, green, Control side: ELCO socket, 56-pinpa |
|
|
|
|
| 16-channel, Connection board for K-System HART Multiplexer, Interface for parallel connections, Connection via spring terminalspa |
|
|
|
|
| System board for Triconex, HART Termination Board (ETP) for Tricon AO module, For 8-channel AO card 3805E, 8-channel, Field side: pluggable screw terminals, green, Control side: ELCO socket, 56-pinpa |
|
| Matching System Components |
|
|
|
| 16-channel, 24 V DC supply (Power Rail), HART field device input (revision 5 to 7), Up to 15 KFD0-HMS-16 slave units can be connected, Up to SIL 3 acc. to IEC 61508pa |
|
|
|
|
| 16-channel, No external power required, HART field device input (revision 5 to 7), Used with HART Multiplexer Master KFD2-HMM-16, Up to SIL 3 acc. to IEC 61508pa |
|
Function:
K-HM14
The connection cable K-HM14 is used for connection of a HART Multiplexer Master KFD2-HMM-16 to up to 15 HART Multiplexer Slaves KFD0-HMS-16.
The connection cable has 16 connectors and a length of 0.45 m.
+49 621 776-0