Serviceline Industrial Sensors
Serviceline Explosion Protection

HART Connection Cable with Connectors K-HM26

  • K-System accessory
  • Connection cable for KF*-HM*-16 to Termination Board
  • 26-pin flat cable

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  K-HM26

Product Description
HART connection cable for master/slave - termination board connection
Ambient conditions
Ambient temperature0 ... 55 °C (32 ... 131 °F)
Relative humidity5 ... 90 %, non-condensing
Mechanical specifications
Device1 x IDC female connector, 26-pin
Cable length1 m

Associated Products: K-HM26

Accessory of

16-channel, 24 V DC supply (Power Rail), HART field device input (revision 5 to 7), Up to 15 KFD0-HMS-16 slave units can be connected, Up to SIL 3 acc. to IEC 61508pa

Connection board for K-System HART Multiplexer, 16-channel, Interface for series connection or parallel connection, Integrated, switchable 220 Ω resistorpa

16-channel, No external power required, HART field device input (revision 5 to 7), Used with HART Multiplexer Master KFD2-HMM-16, Up to SIL 3 acc. to IEC 61508pa
16-channel, Connection board for K-System HART Multiplexer, Interface for parallel connections, Connection via spring terminalspa
System board for Triconex, HART Termination Board (ETP) for Tricon v10 AI module, For 16-channel AI cards 3700, 3700A, 3703E and 3721, 16-channel, Field side: screw terminals, green, Control side: ELCO socket, 56-pinpa

Function: K-HM26

The connection cable K-HM26 is used for connection of a HART Multiplexer KFD*-HM*-16 to a K-System Termination Board.

The connection cable has a length of 1 m. Other cable lengths (max. 8 m) are available upon request.