Serviceline Industrial Sensors
Serviceline Explosion Protection
Thermocouple Converter KFD0-TT-Ex1
- 1-channel isolated barrier
- 24 V DC supply (loop powered)
- Thermocouple input
- Output 4 mA ... 20 mA
- Internal cold junction compensation
- Sensor breakage detection
- DIP switch selectable ranges
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of KFD0-TT-Ex1
| General specifications | ||
|---|---|---|
| Signal type | Analog input | |
| Supply | ||
| Rated voltage | 12 ... 35 V DC loop powered | |
| Power dissipation | 0.4 W | |
| Input | ||
| Connection side | field side | |
| Connection | terminals 1+, 2-, 3- thermocouple E, J, K, N, R, S or T, cold junction referenced to 0 °C (32 °F) | |
| Lead resistance | max. 100 Ω per line | |
| Current | lead monitoring ON: ≤ 15 nA; OFF: ≤ 1 nA | |
| Output | ||
| Connection side | control side | |
| Connection | terminals 9+, 8- | |
| Load | (U -12 V) / 0.02 A | |
| Current output | 4 ... 20 mA , limited to ≤ 35 mA | |
| Fault signal | downscaling ≤ 3 mA , upscaling ≥ 22 mA | |
| Transfer characteristics | ||
| Measurement range | span 4 ... 100 mV, zero point -12 ... 60 mV , both adjustable | |
| Deviation | ||
| After calibration | 0.1 % of full-scale value ± 1 K for the cold junction | |
| Temperature effect | temperature deviation 0.015 % of the span/K or 1.5 µV/K cold junction ± 2 K (calibrated at Tamb = 20 °C (68 °F)) | |
| Influence of supply voltage | 6.5 ppm/V | |
| Characteristic curve | the output voltage is linearly proportionate to the input voltage (not to temperature) | |
| Rise time | 250 ms | |
| Galvanic isolation | ||
| Input/Output | safe isolation according to EN 50178, rated insulation voltage 253 Veff | |
| Indicators/settings | ||
| Control elements | DIP-switch rotary switch |
|
| Configuration | via DIP switches via rotary switch |
|
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Insulation coordination | EN 50178 | |
| Galvanic isolation | EN 50178 | |
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 150 g | |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | ZELM 00 ATEX 0035 | |
| Marking |  II (1)GD [EEx ia] IIC |
|
| Voltage | 16.1 V | |
| Current | 0.8 mA | |
| Power | 3.2 mW | |
| Output | ||
| Maximum safe voltage | 60 V (Attention! The rated voltage can be lower.) | |
| Certificate | TÜV 01 ATEX 1777 X | |
| Marking | II 3G Ex nA II T4 |
|
| Galvanic isolation | ||
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| CSA approval | ||
| Control drawing | 116-0132 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Documents: KFD0-TT-Ex1
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual Isolated Barriers K-system | ENG | 760 KB | |
| Manuel pour Barrières Isolées de Système K | FRA | 759 KB | |
| Handbuch Trennbarrieren K-System | GER | 745 KB | |
| Manual Isolated Barriers K-system | RUS | 4107 KB | |
| Instructions, short instructions, safety information | |||
| Инструкции | BUL | 69 KB | |
| Návod k poużití | CZE | 61 KB | |
| Instruktions manual | DAN | 58 KB | |
| Instruction manual | ENG | 50 KB | |
| Kasutusjuhend | EST | 56 KB | |
| Käyttöohje | FIN | 56 KB | |
| Manuel d'instructions | FRA | 97 KB | |
| Betriebsanleitung | GER | 62 KB | |
| Οδηγίες χρήσης | GRE | 73 KB | |
| Handleiding | HOL | 72 KB | |
| Instruction manual / Betriebsanleitung | HRV | 70 KB | |
| Használati útmutató | HUN | 71 KB | |
| Manuale di istruzioni | ITA | 93 KB | |
| Lietošanas pamācība | LAV | 68 KB | |
| Instrukciju vadovas | LIT | 68 KB | |
| Instrukcja obsługi | POL | 72 KB | |
| Manual de instruções | POR | 72 KB | |
| Manual de utilizare | RON | 71 KB | |
| Návod na poużitie | SLK | 130 KB | |
| Manual de instrucciones | SPA | 95 KB | |
| Manual | SWE | 66 KB | |
CAD+CAE: KFD0-TT-Ex1
| EPLAN | File Type | File Size | |
|---|---|---|---|
| EPLAN Data Portal / EPLAN Data Portal | LINK | --- | |
| EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 48 KB | |
| Prolist | |||
| Prolist device specification / Prolist Gerätespezifikation | XML | 28 KB | |
Approvals+Certificates: KFD0-TT-Ex1
| Statements of compliance | Certificate No. | File Type | File Size |
|---|---|---|---|
| EU-Declaration of conformity / EU-Konformitätserklärung | DOC-0770A | 122 KB | |
| Certificates | |||
| Belarus Pattern Approval | Nr. 11709 | 15640 KB | |
| Canada CSA | CoC 1029981 C | 201 KB | |
| EAC EAC TP TC 020/2011 | TC RU C-DE.MH04.B.00397 | 680 KB | |
| Europe TUV Nord ATEX Category 3 | TÜV 01 ATEX 1777X | 767 KB | |
| Europe ZELM ATEX Category (1) GD | ZELM 00 ATEX 0035 | 565 KB | |
| Russia Belarus EAC Kazakhstan NANIO "CCVE" | TC RU C-IT.GB05.B.00718 | 2731 KB | |
| Russia VNIIMS Pattern Approval | DE.C.32.004.A No.53706 | 4041 KB | |
| South Africa MASC Zone 2 | MASC S/17-0871 | 242 KB | |
| Control drawings | |||
| Control Drawing CSA / Control Drawing CSA | 54 KB | ||
Pepperl+Fuchs GmbH
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
Phone: +49 621 776-0
© 2019 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,200 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.