Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
NCN25-30GM50-Z4
General specifications |
Switching function | Normally open (NO) |
Output type | Two-wire |
Rated operating distance | 25 mm |
Installation | non-flush |
Output polarity | DC |
Assured operating distance | 0 ... 20 mm |
Reduction factor rAl | 0.4 |
Reduction factor rCu | 0.4 |
Reduction factor r304 | 0.7 |
Reduction factor rBrass | 0.5 |
Nominal ratings |
Operating voltage | 3.5 ... 30 V |
Switching frequency | 500 Hz |
Hysteresis | typ. 3 % |
Reverse polarity protection | reverse polarity-conductive |
Short-circuit protection | pulsing |
Voltage drop | ≤ 3.5 V |
Temperature drift | ± 15% |
Operating current | 2 ... 100 mA |
Off-state current | typ. 0.8 mA |
Switching state indicator | LED, yellow |
Pre-fault indicator | LED, red |
Stability control-switch point | 0,8 sr ... 0,9 sr |
Functional safety related parameters |
MTTFd | 1182 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Approvals and certificates |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
Mechanical specifications |
Connection type | cable PVC , 2 m |
Core cross-section | 0.34 mm2 |
Housing material | brass, nickel-plated |
Sensing face | PBT |
Housing diameter | 30 mm |
Degree of protection | IP67 |
Documents:
NCN25-30GM50-Z4
Approvals+Certificates:
NCN25-30GM50-Z4
Associated Products:
NCN25-30GM50-Z4
Accessories |
|
|
|
Mounting flange, 30 mmfa |
|