Inductive sensor NJ2-11-N-G-Y133784
- Comfort series
NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of NJ2-11-N-G-Y133784
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Assured operating distance | 0 ... 1.62 mm | |
| Actual operating distance | 1.8 ... 2.2 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8 V | |
| Switching frequency | 0 ... 3000 Hz | |
| Hysteresis | 0.5 ... 3.5 typ. 2 % | |
| Current consumption | ||
| Measuring plate not detected | min. 3 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Standard conformity | ||
| EMC in accordance with | IEC / EN 60947-5-2:2004 | |
| Standards | DIN EN 60947-5-6 (NAMUR) | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
| Mechanical specifications | ||
| Connection type | cable PVC , 20 m | |
| Core cross section | 0.34 mm2 | |
| Housing material | Stainless steel | |
| Sensing face | PVDF | |
| Degree of protection | IP68 | |
| Dimensions | ||
| Length | 70 mm | |
| Diameter | 14 mm | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NJ2-11-N-G-Y133784
Datasheet: NJ2-11-N-G-Y133784
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet NJ2-11-N-G-Y133784 | 278 KB | |
| Datasheet NJ2-11-N-G-Y133784 | 241 KB | |
| Fiche de données NJ2-11-N-G-Y133784 | 255 KB | |
| Datenblatt NJ2-11-N-G-Y133784 | 240 KB | |
| Scheda tecnica NJ2-11-N-G-Y133784 | 252 KB | |
| Datasheet NJ2-11-N-G-Y133784 | 284 KB | |
| Folha de dados NJ2-11-N-G-Y133784 | 242 KB | |
| Hoja de datos NJ2-11-N-G-Y133784 | 263 KB | |
| Datasheet NJ2-11-N-G-Y133784 | 240 KB |
CAD+CAE: NJ2-11-N-G-Y133784
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 46 KB |
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.