Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
SB3,5-E2
General specifications |
Switching function | Normally open (NO) |
Output type | PNP |
Slot width | 3.5 mm |
Depth of immersion (lateral) | 5 ... 7 mm |
Output polarity | DC |
Output type | 3-wire |
Nominal ratings |
Operating voltage | 10 ... 30 V DC |
Switching frequency | 0 ... 3000 Hz |
Hysteresis | 0 ... 0.6 mm |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Voltage drop | ≤ 3 V |
Operating current | 0 ... 100 mA |
No-load supply current | ≤ 7 mA |
Switching state indicator | LED, yellow |
Functional safety related parameters |
MTTFd | 2590 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Approvals and certificates |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Mechanical specifications |
Connection type | flexible leads LiY , 500 mm |
Core cross-section | 0.14 mm2 |
Housing material | PBT |
Degree of protection | IP67 |
Approvals+Certificates:
SB3,5-E2