Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Rated operating distance||25 mm|
|Assured operating distance||0 ... 20 mm|
|Reduction factor rAl||0.5|
|Reduction factor rCu||0.5|
|Reduction factor r304||0.6 ... 1|
|Amplifier housing||Stainless steel|
|Operating voltage||10 ... 30 V|
|Switching frequency||0 ... 20 Hz|
|Hysteresis||0.3 ... 5 typ. 2 %|
|Reverse polarity protection||reverse polarity protected|
|Voltage drop||≤ 3 V|
|Operating current||0 ... 200 mA|
|No-load supply current||≤ 25 mA|
|Time delay before availability||≤ 20 ms|
|Switching state indicator||Multihole-LED, yellow|
|Functional safety related parameters|
|Mission Time (TM)||20 a|
|Diagnostic Coverage (DC)||0 %|
|Compliance with standards and directives|
|Approvals and certificates|
|UL approval||cULus Listed, General Purpose, Class 2 Power Source|
|CCC approval||CCC approval / marking not required for products rated ≤36 V|
|Ambient temperature||0 ... 250 °C (32 ... 482 °F)|
|Connection type||Connector plug M12 x 1 , 4-pin|
|Cable version||PFA cable, with armour of stainless steel|
|Core cross-section||3 x 0.34 , screened|
|Housing material||PTFE / Al / 1.4305 / AISI 303|
|Degree of protection||amplifier IP67
|Cable length||L = 10 m|
|Note||- amplifier 0 °C ... 70 °C
- r1.4305 dep. on thickness of measurement plate d:
r1.4305 = 1 for d < 1mm
Additional accessory: Protective cover SH-F35 is available for use in areas where there is moisture and as a means of mechanical protection.
|CAD||File Type||File Size|
|3-D model / 3-D-Modell||STP||702 KB|
|CAD Portal / CAD Portal||LINK||---|
|EPLAN Data Portal / EPLAN Data Portal||LINK||---|
|EPLAN macro EDZ / EPLAN Makro EDZ||EDZ||65 KB|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-3207B||1217 KB|
|Canada USA UL Ordinary Location||20170306-E87056||407 KB|
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.