Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NJ1,5-F2-E0-V1

NJ1,5-F2-E0-V1
  • Comfort series
  • 1.5 mm with switching tappet
  • 3-wire DC

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of NJ1,5-F2-E0-V1

General specifications
Switching functionNormally open (NO)
Output typeNPN
Rated operating distance1.5 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 1.215 mm
Nominal ratings
Operating voltage10 ... 30 V DC
Switching frequency1000 Hz
Hysteresistyp. 5%
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 3 V
Operating current0 ... 200 mA
No-load supply current≤ 15 mA
Switching state indicatorLED, red
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeConnector M12 x 1 , 4-pin
Housing materialPolyamide (PA)
Degree of protectionIP67
Mass15 g
NoteUse a stop screw combined with a model -F2 sensor from Pepperl+Fuchs GmbH.
The maximum actuation speed of the control slide is 0.1 m/s

Approvals+Certificates: NJ1,5-F2-E0-V1

CertificatesCertificate No.File TypeFile Size
Canada USA CSA Ordinary Location1007121PDF99 KB
Canada USA UL Ordinary Location20170306-E87056PDF407 KB

Associated Products: NJ1,5-F2-E0-V1

Accessories

Female cordset, M12, 4-pin, PUR cablefa

Female cordset, M12, 4-pin, PUR cablefa
fa
fa
fa
fa
fa