Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive slot sensor GT3,51 50.000/0400

GT3,51 50.000/0400
  • 3.5 mm slot width

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  GT3,51 50.000/0400

General specifications
Switching functionNormally open (NO)
Output typePNP
Slot width3.5 mm
Depth of immersion (lateral)4 ... 6 typ. 6 mm
Output polarityDC
Output type3-wire
Nominal ratings
Operating voltage6 ... 30 V
Switching frequency0 ... 2000 Hz
Hysteresis0.15 ... 0.6 mm
Reverse polarity protectionreverse polarity protected
Short-circuit protectionyes
Voltage drop≤ 3 V
Operating current0 ... 100 mA
No-load supply current≤ 15 mA
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Housing materialPA 6.6
Degree of protectionIP67
Mass18 g
Dimensions
Height17 mm
Width10 mm
Length20 mm

Classifications

SystemClasscode
ECLASS 13.027274001
ECLASS 12.027274001
ECLASS 11.027270101
ECLASS 10.0.127270101
ECLASS 9.027270101
ECLASS 8.027270101
ECLASS 5.127270101
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: GT3,51 50.000/0400

Approvals: GT3,51 50.000/0400

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
China Information on CCCCCC-Exempt Declaration (Pepperl+Fuchs)ALLPDF457 KB

Associated Products: GT3,51 50.000/0400

Accessories
Female connector, M9, 4-pin, field attachablefa

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.