Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NMB1,5-8GM23-Z3-C-FE-850MM-V1

NMB1,5-8GM23-Z3-C-FE-850MM-V1
  • 1.5 mm flush
  • 2-wire DC
  • Stainless steel sensing face
  • Weld field immune
  • Weld slag resistant coating
  • Ferrous targets

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NMB1,5-8GM23-Z3-C-FE-850MM-V1

General specifications
Switching functionNormally open (NO)
Output typeTwo-wire
Rated operating distance1.5 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 1.215 mm
Actuating elementFerrous targets
Reduction factor rAl 0
Reduction factor rCu 0
Reduction factor r304 0.4 - 0.7
Reduction factor rSt37 1
Reduction factor rBrass 0
Output type2-wire
Nominal ratings
Operating voltage6 ... 30 V DC
Switching frequency0 ... 5 Hz
Hysteresis3 ... 15 typ. 5 %
Reverse polarity protectionreverse polarity tolerant
Short-circuit protectionpulsing
Voltage drop≤ 4.5 V DC
Operating current2 ... 100 mA
Lowest operating current2 mA
Off-state current≤ 0.6 mA
Switching state indicatorLED, red
Mag. Field strength, AC fields250 mT
Mag. Field strength, DC fields250 mT
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeCable connector M12 x 1 , 4-pin with TPE Cable, 850 mm
Housing materialXylan coated - Stainless steel 1.4305 / AISI 303
Sensing faceXylan coated - Stainless steel 1.4305 / AISI 303
Degree of protectionIP67

Documents: NMB1,5-8GM23-Z3-C-FE-850MM-V1

Technical informationLanguageFile TypeFile Size
Installation conditionsENGPDF1054 KB
EinbaubedingungenGERPDF1060 KB

CAD+CAE: NMB1,5-8GM23-Z3-C-FE-850MM-V1

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS6878 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP3297 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: NMB1,5-8GM23-Z3-C-FE-850MM-V1

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2195CPDF71 KB
Certificates
Canada USA CSA Ordinary Location1007121PDF99 KB
Canada USA UL Ordinary Location20170306-E87056PDF407 KB

Associated Products: NMB1,5-8GM23-Z3-C-FE-850MM-V1

Accessories

Mounting flange, 8 mmfa
Female cordset single-ended M12 A-coded 4-pin, TPE cable welding-bead resistant orangefa
VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.