Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NBN15-30GK60-UR-1M

NBN15-30GK60-UR-1M
  • Relay output
  • Sensing range 15 mm
  • SPDT output
  • AC/DC Model
  • Switch load currents to 6 Amps

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NBN15-30GK60-UR-1M

General specifications
Switching functionchange-over contact
Output typerelay
Rated operating distance15 mm
Installationnon-flush
Output polarityDC
Reduction factor rAl 0.4
Reduction factor rCu 0.37
Reduction factor r304 0.73
Output typeRelay output
Mechanical lifeNo load: 2 x 107 operations Full load: 1 x 105 switching cycles
Nominal ratings
Operating voltage20 ... 132 V AC/DC
Hysteresis1 ... 12 %
Reverse polarity protectionreverse polarity tolerant
Short-circuit protectionno
Operating current≤ 50 mA
Switching state indicatorLED, red 360°
Output
Switching voltagemax 28 V DC , 250 V AC
Switching current6 A , AC/DC, resistive load
Switching powermax 180 W
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
Ambient conditions
Ambient temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Connection type1-meter cable, PVC heavy jacket, 5-conductor, #18 AWG
Core cross-section0.75 mm2
Housing materialPBT
Sensing facePBT
Degree of protectionIP68

Approvals+Certificates: NBN15-30GK60-UR-1M

CertificatesCertificate No.File TypeFile Size
Canada USA CSA Ordinary Location1007121PDF99 KB
Canada USA UL Ordinary Location20170306-E87056PDF407 KB

Associated Products: NBN15-30GK60-UR-1M

Accessories

Mounting flange, 30 mmfa
Mounting aidfa
VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.