Serviceline Industrial Sensors
Serviceline Explosion Protection
Not available for purchase
Not available for purchase

Inductive sensor NBB3-V3-Z4-Y222709

NBB3-V3-Z4-Y222709
  • Basic series

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NBB3-V3-Z4-Y222709

General specifications
Switching functionNormally open (NO)
Output typeTwo-wire
Rated operating distance3 mm (approx. 3.5 mm at 85 °C [185 °F])
Installationflush
Output polarityDC
Assured operating distance0 ... 2.4 mm
Actual operating distance2.7 ... 3.3 mm typ.
Reduction factor rAl 0.4
Reduction factor rCu 0.3
Reduction factor r304 0.8
Output type2-wire
Nominal ratings
Operating voltage5 ... 60 V
Switching frequency0 ... 2000 Hz
Hysteresistyp. 0.2 mm
Reverse polarity protectionreverse polarity protected
Short-circuit protectionno
Voltage drop≤ 5 V
Voltage drop at IL
Voltage drop IL = 10 mA, switching element on0.8 ... 4.8 V typ. 3.8 V
Operating current4 ... 100 mA
Lowest operating current4 mA
Off-state current0 ... 1 mA typ. 0.7 mA
Time delay before availability≤ 1 ms
Switching state indicatorLED, yellow
Limit data
Tightening torque, fastening screws0.4 Nm
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection typecable PVC , 220 mm
Core cross section0.14 mm2
Housing materialPBT
Sensing facePBT
Degree of protectionIP67
Dimensions
Height10.2 mm
Width27.8 mm
Length16 mm

Classifications

SystemClasscode
ECLASS 13.027274001
ECLASS 12.027274001
ECLASS 11.027270101
ECLASS 10.0.127270101
ECLASS 9.027270101
ECLASS 8.027270101
ECLASS 5.127270101
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: NBB3-V3-Z4-Y222709

Product Documentation: NBB3-V3-Z4-Y222709

Language Selection:
Product informationLanguageFile TypeFile Size
Installation conditionsENGPDF130 KB

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.