Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Switching function||Normally closed (NC)|
|Rated operating distance||1.5 mm|
|Assured operating distance||0 ... 1.215 mm|
|Reduction factor rAl||0.3|
|Reduction factor rCu||0.2|
|Reduction factor r304||0.7|
|Operating voltage||5 ... 30 V DC|
|Switching frequency||0 ... 1200 Hz|
|Hysteresis||typ. 5 %|
|Voltage drop||≤ 1.5 V|
|Operating current||0 ... 100 mA|
|Off-state current||≤ 10 µA|
|No-load supply current||≤ 15 mA|
|Functional safety related parameters|
|Mission Time (TM)||20 a|
|Diagnostic Coverage (DC)||0 %|
|Approvals and certificates|
|CCC approval||CCC approval / marking not required for products rated ≤36 V|
|Ambient temperature||-25 ... 70 °C (-13 ... 158 °F)|
|Connection type||Cable connector M8 x 1 , 3-pin with PVC cable 100 mm|
|Core cross-section||0.09 mm2|
|Degree of protection||IP67|
|Technical information||Language||File Type||File Size|
|Installation conditions||ENG||133 KB|
|CAD||File Type||File Size|
|3-D model / 3-D-Modell||STP||95 KB|
|CAD Portal / CAD Portal||LINK||---|
|EPLAN Data Portal / EPLAN Data Portal||LINK||---|
|EPLAN macro EDZ / EPLAN Makro EDZ||EDZ||64 KB|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-0912C||1220 KB|
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.