Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NBB8-18GM60-B3B-V1

NBB8-18GM60-B3B-V1
  • 8 mm flush
  • Cylindrical
  • A/B slave with extended addressing possibility for up to 62 slaves
  • NO/NC selectable
  • On/Off delay (disconnectable)

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NBB8-18GM60-B3B-V1

Product Description
AS-Interface
General specifications
Switching functionNormally open/closed (NO/NC) programmable
Output typeAS-Interface
Rated operating distance8 mm
Installationflush
Assured operating distance0 ... 6.48 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.4
Reduction factor r304 0.7
Reduction factor rBrass 0.5
Slave typeA/B slave
AS-Interface specificationV3.0
Required master specification≥ V2.1
Output type2-wire
Nominal ratings
Operating voltage26.5 ... 31.9 V via AS-i bus system
Switching frequency0 ... 200 Hz
Hysteresis1 ... 15 typ. 5 %
Reverse polarity protectionreverse polarity protected
No-load supply current≤ 25 mA
Switching state indicatordual-LED, yellow
Error indicatordual-LED, red
Functional safety related parameters
MTTFd926 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
EN 50295:1999
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector plug M12 x 1 , 4-pin
Housing materialbrass, nickel-plated
Sensing facePBT
Degree of protectionIP67

Documents: NBB8-18GM60-B3B-V1

Technical informationLanguageFile TypeFile Size
Installation conditionsENGPDF1053 KB
EinbaubedingungenGERPDF1054 KB

Approvals+Certificates: NBB8-18GM60-B3B-V1

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3464PDF37 KB
Certificates
Canada USA CSA Ordinary Location1007121PDF99 KB

Associated Products: NBB8-18GM60-B3B-V1

Accessories

Mounting flange, 18 mmfa

Quick mounting bracket with dead stopfa
Connection cable, M12 to M12, PUR cable, 4-pinfa
Connection cable, M12 to M12, PUR cable, 4-pinfa
VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.