Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NEB22-30GM60-E3-V1

NEB22-30GM60-E3-V1
  • 22 mm quasi flush
  • Increased operating distance

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NEB22-30GM60-E3-V1

General specifications
Switching functionNormally closed (NC)
Output typePNP
Rated operating distance22 mm
Installationquasi flush
Output polarityDC
Assured operating distance0 ... 17.8 mm
Reduction factor rAl 0.25
Reduction factor rCu 0.22
Reduction factor r304 0.65
Output type3-wire
Nominal ratings
Installation conditions
A6 mm
B37 mm
C66 mm
F80 mm
Operating voltage10 ... 30 V
Switching frequency0 ... 150 Hz
Hysteresis≤ 10 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 5 V
Operating current0 ... 200 mA
Off-state current≤ 0.1 mA
No-load supply current≤ 10 mA
Switching state indicatorMultihole-LED, yellow
Functional safety related parameters
MTTFd213 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeConnector plug M12 x 1 , 4-pin
Housing materialchromium plated brass
Sensing facePBT
Degree of protectionIP67

Approvals+Certificates: NEB22-30GM60-E3-V1

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3027APDF170 KB

Associated Products: NEB22-30GM60-E3-V1

Accessories

Mounting flange, 30 mmfa

Female cordset, M12, 4-pin, PUR cablefa

Female cordset, M12, 4-pin, PUR cablefa
VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.