Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NBB1,5-8GS30-E2-T

NBB1,5-8GS30-E2-T
  • 1.5 mm flush
  • Stainless steel housing
  • Extended temperature range

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of NBB1,5-8GS30-E2-T

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance1.5 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 1.215 mm
Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
8 mm x 8 mm x 1 mm
Reduction factor rAl 0.38
Reduction factor rCu 0.2
Reduction factor r304 0.8
Reduction factor rBrass 0.45
Output type3-wire
Nominal ratings
Operating voltage10 ... 30 V
Switching frequency0 ... 1500 Hz
Hysteresis0.01 ... 0.33 mm
Reverse polarity protectionyes
Short-circuit protectionyes
Overload resistanceyes
Wire breakage protectionyes
Inductive overvoltage protectionyes
Surge suppressionyes
Ripple10 %
Voltage drop≤ 2.5 V
Repeat accuracy0.04 mm
Operating current0 ... 200 mA
Off-state current0.01 mA
No-load supply current≤ 7 mA
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd2360 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Approvals and certificates
UL approvalcULus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 100 °C (-13 ... 212 °F)
Storage temperature-40 ... 100 °C (-40 ... 212 °F)
Mechanical specifications
Connection typecable PUR , 2 m
Core cross-section0.25 mm2
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePBT
Degree of protectionIP67
Mass58 g

Documents: NBB1,5-8GS30-E2-T

Technical informationLanguageFile TypeFile Size
Installation conditionsENGPDF191 KB
EinbaubedingungenGERPDF194 KB
warunki montażuPOLPDF245 KB
Условия монтажаRUSPDF274 KB
Documents
EPLAN macro EMA / EPLAN Makro EMAALLEMA91 KB

Approvals+Certificates: NBB1,5-8GS30-E2-T

CertificatesCertificate No.File TypeFile Size
Canada USA UL Ordinary Location20170306-E87056PDF402 KB

Associated Products: NBB1,5-8GS30-E2-T

Accessories

Mounting flange, 8 mmfa
Quick mounting bracket with dead stopfa