Serviceline Industrial Sensors
Serviceline Explosion Protection

Not available for purchase

This product has been replaced.Go to replacement product NBB15-F148P10-E2-M
Not available for purchase

Inductive sensor NBB15-F148P10-E2-M

NBB15-F148P10-E2-M
  • 15 mm flush
  • 3-wire DC
  • Extended temperature range
  • E1-Type approval

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NBB15-F148P10-E2-M

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance15 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 12.15 mm
Reduction factor rAl 0.45
Reduction factor rCu 0.35
Reduction factor r304 0.8
Reduction factor rBrass 0.5
Output type3-wire
Nominal ratings
Operating voltage10 ... 60 V DC
Switching frequency0 ... 30 Hz
Hysteresis2 ... 20 % ( typ. 3 % )
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 1.5 V
Operating current0 ... 200 mA
Off-state current≤ 10 µA
No-load supply current≤ 10 mA
Time delay before availability≤ 55 ms
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd1180 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
E1 Type approval10R-04
Ambient conditions
Ambient temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typecable PUR , 2 m
Core cross-section0.75 mm2
Housing materialanodized aluminum
Sensing facePBT
Degree of protectionIP67 / IP69K
Cable
Cable diameter6 mm ± 0.2 mm
Bending radius> 6 x cable diameter

Documents: NBB15-F148P10-E2-M

DocumentsLanguageFile TypeFile Size
EPLAN macro EMA / EPLAN Makro EMAALLEMA91 KB

Approvals+Certificates: NBB15-F148P10-E2-M

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0326BPDF170 KB
Certificates
UNECE KBA E110R-047189PDF271 KB