Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NBB1-8GS50-Z0-T

NBB1-8GS50-Z0-T
  • 1 mm flush
  • Extended temperature range
  • Stainless steel version

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NBB1-8GS50-Z0-T

General specifications
Switching functionNormally open (NO)
Output typeTwo-wire
Rated operating distance1 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 0.81 mm
Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
8 mm x 8 mm x 1 mm
Reduction factor rAl 0.38
Reduction factor rCu 0.2
Reduction factor r304 0.8
Reduction factor rBrass 0.45
Nominal ratings
Installation conditions
B4 mm
C3 mm
F12 mm
Operating voltage15 ... 34 V
Switching frequency0 ... 1500 Hz
Hysteresis0.01 ... 0.28 mm
Reverse polarity protectionno
Short-circuit protectionno
Overload resistanceno
Wire breakage protectionyes
Inductive overvoltage protectionyes
Surge suppressionyes
Ripple10 %
Voltage drop≤ 8 V
Repeat accuracy0.1 mm
Operating current0 ... 25 mA
No-load supply current≤ 1.5 mA
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd2390 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 100 °C (-13 ... 212 °F)
Storage temperature-40 ... 100 °C (-40 ... 212 °F)
Mechanical specifications
Connection typecable PUR , 2 m
Core cross-section0.25 mm2
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePBT
Housing diameter8 mm
Degree of protectionIP67
Mass70 g

Documents: NBB1-8GS50-Z0-T

Technical informationLanguageFile TypeFile Size
technical information (TI)ENGPDF1053 KB
technische Information (TI)GERPDF1054 KB

Associated Products: NBB1-8GS50-Z0-T

Accessories

Mounting flange, 8 mmfa
Quick mounting bracket with dead stopfa