Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NBB0,8-F141-E2

NBB0,8-F141-E2
  • Basic series
  • 0.8 mm flush
  • 3-wire DC
  • Extremely high switching frequency
  • Metal housing

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NBB0,8-F141-E2

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance0.8 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 0.648 mm
Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
5 mm x 5 mm x 1 mm
Reduction factor rAl 0.6
Reduction factor rCu 0.45
Reduction factor r304 0.85
Reduction factor rBrass 0.6
Nominal ratings
Operating voltage10 ... 30 V DC
Switching frequency0 ... 10000 Hz
Hysteresis0.01 ... 0.1
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Overload resistanceyes
Wire breakage protectionyes
Inductive overvoltage protectionyes
Surge suppressionyes
Ripple≤ 10 %
Voltage drop≤ 1.5 V
Repeat accuracy0.01 mm
Operating current0 ... 200 mA
Off-state current0 ... 0.1 mA
No-load supply current≤ 5 mA
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd1354 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typecable PUR , 2 m
Core cross-section0.14 mm2
Housing materialbrass, nickel-plated
Sensing facePOM
Housing diameter
Degree of protectionIP67
Mass40 g

Documents: NBB0,8-F141-E2

DocumentsLanguageFile TypeFile Size
EPLAN macro EMA / EPLAN Makro EMAALLEMA91 KB

Approvals+Certificates: NBB0,8-F141-E2

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3060APDF169 KB
VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.