Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NBB0,8-4S25-E2-0,2M-V3

NBB0,8-4S25-E2-0,2M-V3
  • 0.8 mm flush
  • Stainless steel housing

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NBB0,8-4S25-E2-0,2M-V3

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance0.8 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 0.648 mm
Reduction factor rAl 0.5
Reduction factor rCu 0.45
Reduction factor r304 0.8
Reduction factor rBrass 0.55
Nominal ratings
Installation conditions
A0 mm
B0 mm
C2.4 mm
F4 mm
Operating voltage10 ... 30 V
Switching frequency0 ... 5000 Hz
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 2 V
Operating current0 ... 200 mA
Off-state current0 ... 0.1 mA
No-load supply current≤ 10 mA
Switching state indicatorLED, yellow
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeCable connector M8 x 1 , 3-pin , cable: PVC , L = 200 mm
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePA 66
Housing diameter4 mm
Degree of protectionIP67

Approvals+Certificates: NBB0,8-4S25-E2-0,2M-V3

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0598BPDF169 KB