Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive analog sensor ANT2-8 2084/85 V1

ANT2-8 2084/85 V1
  • Inductive analog
  • Output 0 V ... 10 V
  • Output 0 mA ... 20 mA
  • Non-flush mountable

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  ANT2-8 2084/85 V1

General specifications
Output typeAnalog current output or analog voltage output
Installationnon-flush
Output polarityDC
Measurement range2 ... 8 mm
Output type3-wire
Nominal ratings
Operating voltage18 ... 30 V
Output signal0 ... 20 mA 0 ... 10 V
Reverse polarity protectionreverse polarity protected
Linearity error± 0.5 %
Temperature drift≤ 0.2 % / K v.E.
Repeat accuracy< 0.02 mm
No-load supply current≤ 15 mA
Load resistorvoltage output: ≥ 4,7 kΩ
current output: ≤ 200 Ω
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeM12 x 1
Housing materialbrass, nickel-plated
Sensing facePBT
Degree of protectionIP67
VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.