Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Switching function||Normally closed (NC)|
|Rated operating distance||4 mm|
|Assured operating distance||0 ... 3.24 mm|
|Reduction factor rAl||0.4|
|Reduction factor rCu||0.4|
|Reduction factor r304||0.7|
|Operating voltage||20 ... 253 V|
|Switching frequency||0 ... 20 Hz|
|Voltage drop||typ. 4 V at 15 ... 200 mA
typ. 6.5 V at 5 mA
(20 ms, 0.1 Hz)
|0 ... 1200 mA|
|Operating current||5 ... 200 mA|
|Off-state current||typ. 0.7 mA|
|Switching state indicator||LED, yellow|
|Approvals and certificates|
|UL approval||cULus Listed, General Purpose|
|CSA approval||cCSAus Listed, General Purpose|
|CCC approval||Certified by China Compulsory Certification (CCC)|
|Ambient temperature||-25 ... 70 °C (-13 ... 158 °F)|
|Connection type||Connector M12 x 1 , 3-pin|
|Housing material||Stainless steel 1.4305 / AISI 303|
|Housing diameter||12 mm|
|Degree of protection||IP67|
|Note||1) In the temperature range below 0 °C, permissible operating voltage Ub 80...253 V
Safety fuse ≤ 0.8 A (quick-blow) according to IEC 60127-2 Sheet 1
Recommendation: after a short circuit, check that the device is functioning correctly.
|Scope of delivery||2 self locking nuts in scope of delivery|
|Technical information||Language||File Type||File Size|
|Installation instructions, locking nut / Montageanleitung, Muttern mit Sperrverzahnung||ALL||1117 KB|
|Installation conditions||ENG||1054 KB|
|CAD||File Type||File Size|
|3-D model in IGS format / 3-D-Modell im IGS-Format||IGS||59 KB|
|3-D model in STP format / 3-D-Modell im STP-Format||STP||45 KB|
|CAD Portal / CAD Portal||LINK||---|
|Certificates||Certificate No.||File Type||File Size|
|Canada USA CSA Ordinary Location||1007121||99 KB|
|Canada USA UL Ordinary Location||20170306-E87056||407 KB|
|China CQC CCC SDOC||2020970305001202||1266 KB|
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.