Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NBN20-30GM50-EI-V1-M1

NBN20-30GM50-EI-V1-M1
  • 20 mm non-flush
  • Extended temperature range
    -40 ... +85 °C
  • Digital current output
  • E1-Type approval

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NBN20-30GM50-EI-V1-M1

General specifications
Output typeDigital current output
Rated operating distance20 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 16.2 mm
Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
60 mm x 60 mm x 1 mm
Reduction factor rAl 0.45
Reduction factor rCu 0.4
Reduction factor r304 0.7
Reduction factor rBrass 0.45
Output type3-wire
Nominal ratings
Operating voltage9 ... 30 V DC
Switching frequency0 ... 1000 Hz
Hysteresis2 ... 15 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionyes
Temperature drift≤ 10 %
Time delay before availability≤ 5 ms
Load resistor100 ... 250 Ohm
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd1545 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Digital output
Output typeobject detected: 10 mA ± 1 mA
object not detected: 5 mA ± 1 mA
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
E1 Type approval10R-04
Ambient conditions
Ambient temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector plug M12 x 1 , 4-pin
Housing materialbrass, nickel-plated
Sensing facePBT
Degree of protectionIP68 / IP69K
Mass135 g
General information
Scope of delivery2 self locking nuts in scope of delivery

CAD+CAE: NBN20-30GM50-EI-V1-M1

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS80 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP62 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: NBN20-30GM50-EI-V1-M1

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3725PDF185 KB
Certificates
Canada USA UL Ordinary Location20170306-E87056PDF402 KB
UNECE KBA E110R-047189PDF271 KB

Associated Products: NBN20-30GM50-EI-V1-M1

Accessories

Mounting flange, 30 mmfa

Female cordset, M12, 4-pin, PUR cablefa

Female cordset, M12, 4-pin, PUR cablefa