Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Output type||Analog current output|
|Measurement range||5 ... 15 mm|
|Operating voltage||15 ... 30 V DC|
|Repeat accuracy||0 ... 200 µm|
|No-load supply current||≤ 12 mA|
|Output type||0 ... 20 mA|
|Slope of output characteristic||2 mA / mm|
|Linearity error||≤ ± 5 % of full-scale value|
|Load resistor||≤ 500 Ω|
|Rate of current rise|
|0 ... 20 mA||≤ 17.5 A/s|
|20 ... 0 mA||≤ 16.4 A/s|
|Temperature drift||≤ ± 0.15 %/K of the measured value|
|Residual ripple||± 125 µA|
|Compliance with standards and directives|
|Approvals and certificates|
|UL approval||cULus Listed, General Purpose|
|CCC approval||CCC approval / marking not required for products rated ≤36 V|
|Ambient temperature||-25 ... 70 °C (-13 ... 158 °F)|
|Connection type||cable PVC , 2 m|
|Core cross-section||0.75 mm2|
|Housing material||Stainless steel V2A|
|Degree of protection||IP67|
|Cable diameter||6.4 mm ± 0.2 mm|
|Bending radius||> 10 x cable diameter|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-3469||185 KB|
|Canada USA UL Ordinary Location||20170306-E87056||407 KB|
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.