Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NJ15-30GM50-E2-3G-3D

NJ15-30GM50-E2-3G-3D
  • 15 mm non-flush
  • ATEX-approval for zone 2 and zone 22

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NJ15-30GM50-E2-3G-3D

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance15 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 12.15 mm
Actual operating distance13.5 ... 16.5 mm typ. 15 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.36
Reduction factor r304 0.71
Reduction factor rBrass 0.45
Output type3-wire
Nominal ratings
Operating voltage10 ... 30 V DC
Switching frequency0 ... 500 Hz
Hysteresis3 ... 15 typ. 7 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 3 V
Voltage drop at IL
Voltage drop IL = 200 mA, switching element on1 ... 2 V typ. 1.5 V
Operating current≤ 200 mA
Off-state current0 ... 0.5 mA typ. 0.01 mA
No-load supply current≤ 15 mA
Time delay before availability≤ 100 ms
Switching state indicatorLED, yellow
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typecable PVC , 2 m
Core cross-section0.75 mm2
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePBT
Degree of protectionIP66 / IP67
Cable
Bending radius> 10 x cable diameter
General information
Scope of delivery2 self locking nuts in scope of delivery
Use in the hazardous areasee instruction manuals

Documents: NJ15-30GM50-E2-3G-3D

Instruction manualsLanguageFile TypeFile Size
ИнструкцииBULPDF155 KB
Návod k poużitíCZEPDF149 KB
Instruktions manualDANPDF148 KB
Instruction manualENGPDF148 KB
KasutusjuhendESTPDF143 KB
KäyttöohjeFINPDF143 KB
Manuel d'instructionsFRAPDF150 KB
BetriebsanleitungGERPDF149 KB
Οδηγίες χρήσηςGREPDF157 KB
HandleidingHOLPDF146 KB
Instruction manual / BetriebsanleitungHRVPDF147 KB
Használati útmutatóHUNPDF149 KB
Manuale di istruzioniITAPDF146 KB
Lietošanas pamācībaLAVPDF146 KB
Instrukciju vadovasLITPDF149 KB
Instrukcja obsługiPOLPDF150 KB
Manual de instruçõesPORPDF148 KB
Manual de utilizareRONPDF148 KB
Návod na poużitieSLKPDF149 KB
Navodila za uporaboSLVPDF147 KB
Manual de instruccionesSPAPDF148 KB
ManualSWEPDF145 KB

CAD+CAE: NJ15-30GM50-E2-3G-3D

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS445 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP122 KB

Approvals+Certificates: NJ15-30GM50-E2-3G-3D

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-4116PDF345 KB
Certificates
/cert/cert4467d.pdf20190220-E87056PDF445 KB
Europe Pepperl+Fuchs ATEX Category 3 D CertificatePF15CERT3774XPDF1001 KB
Europe Pepperl+Fuchs ATEX Category 3 G CertificatePF15CERT3754XPDF1015 KB

Associated Products: NJ15-30GM50-E2-3G-3D

Accessories

Mounting flange, 30 mmfa
VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.