Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Output type||Analog current output|
|Measurement range||1 ... 5 mm|
|Operating voltage||10 ... 30 V DC typ. 20 V DC|
|Reverse polarity protection||yes|
|Repeat accuracy||0 ... 80 µm|
|No-load supply current||≤ 12 mA|
|Output type||0 ... 20 mA|
|Slope of output characteristic||5 mA / mm|
|Linearity error||≤ ± 5 % of full-scale value|
|Load resistor||≤ 1000 Ω typ. 500 Ω|
|Rate of current rise|
|0 ... 20 mA||max. 38.9 A/s|
|20 ... 0 mA||max. 13.9 A/s|
|Recovery time||1 ... 10 ms , typ. 5 ms|
|Adjustment tolerance zero point||≤ ± 5 % of full-scale value|
|Temperature drift||≤ ± 0.15 %/K of full-scale value|
|Residual ripple||± 125 µA|
|Compliance with standards and directives|
|Approvals and certificates|
|UL approval||cULus Listed, Class 2 Power Source|
|CCC approval||CCC approval / marking not required for products rated ≤36 V|
|Ambient temperature||-25 ... 70 °C (-13 ... 158 °F)|
|Connection type||cable PVC , 2 m|
|Core cross-section||0.5 mm2|
|Housing material||brass, nickel-plated|
|Degree of protection||IP67|
|Cable diameter||4.6 mm ± 0.2 mm|
|Bending radius||> 10 x cable diameter|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-3724A||1217 KB|
|Canada USA UL Ordinary Location||20170306-E87056||407 KB|
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.