Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Inductive sensor with relay contact output|
|Switching function||Normally closed (NC)|
|Rated operating distance||15 mm|
|Assured operating distance||0 ... 12.15 mm|
|Reduction factor rAl||0.45|
|Reduction factor rCu||0.35|
|Reduction factor r304||0.8|
|Reduction factor rBrass||0.5|
|Operating voltage||10 ... 30 V DC|
|Switching frequency||0 ... 600 Hz|
|Hysteresis||2 ... 20 % ( typ. 3 % )|
|Reverse polarity protection||reverse polarity protected|
|Voltage drop||≤ 0.5 V (≤ 0.275 V at ≤ 100 mA operating current)|
|Operating current||0 ... 200 mA|
|Off-state current||≤ 10 µA|
|No-load supply current||≤ 10 mA|
|Time delay before availability||≤ 300 ms|
|Switching state indicator||LED, yellow|
|Functional safety related parameters|
|Mission Time (TM)||20 a|
|Diagnostic Coverage (DC)||0 %|
|Compliance with standards and directives|
IEC 60947-5-2 AMD 1:2012
|Ambient temperature||-40 ... 85 °C (-40 ... 185 °F)|
|Storage temperature||-40 ... 85 °C (-40 ... 185 °F)|
|Connection type||cable PUR , 2 m|
|Core cross-section||0.5 mm2|
|Housing material||anodized aluminum|
|Degree of protection||IP67 / IP69K|
|Tightening torque, housing screws||≤ 1.8 Nm|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-4166B||1264 KB|
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.