Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NJ15-30GK-N-30M

NJ15-30GK-N-30M
  • 15 mm non-flush


NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NJ15-30GK-N-30M

General specifications
Switching functionNormally closed (NC)
Output typeNAMUR
Rated operating distance15 mm
Installationnon-flush
Assured operating distance0 ... 12.15 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.3
Reduction factor r304 0.85
Output type2-wire
Nominal ratings
Installation conditions
A18 mm
B30 mm
C45 mm
F90 mm
Nominal voltage8.2 V (Ri approx. 1 kΩ)
Switching frequency0 ... 100 Hz
Hysteresis1 ... 5 typ. 3 %
Current consumption
Measuring plate not detectedmin. 3 mA
Measuring plate detected≤ 1 mA
Functional safety related parameters
MTTFd4560 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Compliance with standards and directives
Standard conformity
NAMUREN 60947-5-6:2000
IEC 60947-5-6:1999
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
EAC conformityTR CU 012/2011
UL approvalcULus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 100 °C (-13 ... 212 °F)
Mechanical specifications
Connection typecable PVC , 30 m
Core cross-section0.75 mm2
Housing materialPBT
Sensing facePBT
Degree of protectionIP66 / IP68
Cable
Bending radius> 10 x cable diameter
General information
Use in the hazardous areasee instruction manuals

Documents: NJ15-30GK-N-30M

Instruction manualsLanguageFile TypeFile Size
ИнструкцииBULPDF166 KB
Návod k poużitíCZEPDF159 KB
Instruktions manualDANPDF158 KB
Instruction manualENGPDF159 KB
KasutusjuhendESTPDF153 KB
KäyttöohjeFINPDF153 KB
Manuel d'instructionsFRAPDF160 KB
BetriebsanleitungGERPDF159 KB
Οδηγίες χρήσηςGREPDF168 KB
HandleidingHOLPDF158 KB
Instruction manual / BetriebsanleitungHRVPDF157 KB
Használati útmutatóHUNPDF161 KB
Manuale di istruzioniITAPDF159 KB
Lietošanas pamācībaLAVPDF155 KB
Instrukciju vadovasLITPDF159 KB
Instrukcja obsługiPOLPDF160 KB
Manual de instruçõesPORPDF160 KB
Manual de utilizareRONPDF161 KB
Návod na poużitieSLKPDF160 KB
Navodila za uporaboSLVPDF156 KB
Manual de instruccionesSPAPDF221 KB
ManualSWEPDF155 KB

Approvals+Certificates: NJ15-30GK-N-30M

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-4212PDF138 KB
Certificates
/cert/cert4467d.pdf20190220-E87056PDF445 KB
EU PTB ATEX ia 2G, 1G, 1D s. certificatePTB 00 ATEX 2048 XPDF29071 KB
Russia NANIO "CCVE"TC RU C-DE.AA87.B.00394PDF3971 KB
Worldwide PTB IECEx iaIECEx PTB 11.0037XLINK---

Associated Products: NJ15-30GK-N-30M

Accessories

Mounting flange, 30 mmfa
VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.