Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Capacitive sensor CJ40-FP-A2-P1

CJ40-FP-A2-P1
  • 40 mm non-flush
  • 4-wire DC
  • The switching distance can be set over a wide range with the potentiometer

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of CJ40-FP-A2-P1

General specifications
Switching functioncomplementary
Output typePNP
Rated operating distance40 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 32.4 mm
Output type4-wire
Nominal ratings
Installation conditions
B40 mm
C80 mm
F120 mm
Operating voltage10 ... 60 V DC
Switching frequency0 ... 10 Hz
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 2.8 V
Operating current0 ... 200 mA
No-load supply current≤ 20 mA
Switching state indicatorLED, yellow
Indicators/operating means
Potentiometersensitivity adjustment
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approvalcULus Listed, General Purpose
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typescrew terminals
Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-sectionup to 2.5 mm2
Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing materialPBT/POM
Sensing facePOM
Housing basePBT
Degree of protectionIP65

Documents: CJ40-FP-A2-P1

Technical informationLanguageFile TypeFile Size
Installation conditionsENGPDF219 KB
EinbaubedingungenGERPDF345 KB

Approvals+Certificates: CJ40-FP-A2-P1

CertificatesCertificate No.File TypeFile Size
Canada USA UL Ordinary Location20170306-E87056PDF407 KB