Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Capacitive sensor CBN15-18GS75-E2

CBN15-18GS75-E2
  • 15 mm non-flush
  • The switching distance can be set over a wide range with the potentiometer

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of CBN15-18GS75-E2

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance2 ... 15 mm
Installationnon-flush
Output polarityDC
Output type3-wire
Nominal ratings
Installation conditions
A30 mm
B18 mm
C30 mm
F36 mm
Operating voltage10 ... 30 V
Switching frequency0 ... 100 Hz
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 1.5 V
Temperature driftmax. 20 % at -5 ... 55 °C (23 ... 131 °F)
Operating current0 ... 100 mA
No-load supply current≤ 15 mA
Time delay before availabilitymax. 300 ms
Indicators/operating means
LED greenOperating display
LED yellowindication switching state
Potentiometersensitivity adjustment
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approvalcULus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection typecable PUR , 2 m
Core cross-section0.34 mm2
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePBT
Degree of protectionIP67

Documents: CBN15-18GS75-E2

Technical informationLanguageFile TypeFile Size
Installation conditionsENGPDF219 KB
EinbaubedingungenGERPDF345 KB
Documents
ePLAN Makro / ePLAN MakroALLEMA91 KB

Approvals+Certificates: CBN15-18GS75-E2

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3063APDF71 KB
Certificates
US CA CSA1007121 (LR96321-2)PDF101 KB
US CA UL General PurposeE87056LINK---

Associated Products: CBN15-18GS75-E2

Accessories

Mounting flange, 18 mmfa