Serviceline Industrial Sensors
Serviceline Explosion Protection

Capacitive sensor CBN10-F46C-EI

CBN10-F46C-EI
  • Flat housing
  • Insensitive to moisture condensation

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  CBN10-F46C-EI

General specifications
Output typeDigital current output
Rated operating distance7 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 5 mm
Output type3-wire
Nominal ratings
Installation conditions
B5 mm
C20 mm
F40 mm / 60 mm
Operating voltage9 ... 30 V
Switching frequency0 ... 5 Hz
Hysteresis1 ... 10 typ. 5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionyes
No-load supply current≤ 20 mA
Load resistor0 ... 250 Ohm
Functional safety related parameters
MTTFd660 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Digital output
Output typeobject detected: 10 mA ± 1 mA
object not detected: 5 mA ± 1 mA
Approvals and certificates
UL approvalUL 60947-5-2: 2014 Class 2 power source type rating 1
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typecable , PUR 2 m
Core cross-section3 x 0.34 mm2
Housing materialPVDF
Sensing facePVDF
Degree of protectionIP67
Mass75 g

Approvals+Certificates: CBN10-F46C-EI

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3215APDF169 KB