Serviceline Industrial Sensors
Serviceline Explosion Protection

Not available for purchase

This product has been replaced.Go to replacement product MMB70-12GH50-1N
Not available for purchase
Not available for purchase

Magnetic field sensor MJ60-12GM-1N

MJ60-12GM-1N
  • Comfort series


NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet excerpt: Technical data of  MJ60-12GM-1N

General specifications
Switching functionNormally open (NO)
Output typeNAMUR
Rated operating distance60 mm
Installationflush
Assured operating distance0 ... 60 mm
Output type2-wire
Nominal ratings
Nominal voltage8 V
Switching frequency0 ... 1000 Hz
Current consumption
Magnet detected≥ 3 mA
Magnet not detected≤ 1 mA
Switching state indicatorLED, yellow
Standard conformity
EMC in accordance withEN 60947-5-2
StandardsDIN EN 60947-5-6 (NAMUR)
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Core cross section0.34 mm2
Housing materialStainless steel
Sensing faceStainless steel
Degree of protectionIP67
Dimensions
Length40 mm
Diameter12 mm
Notediscontinued model
ATEX
Data for Ex areas
Effective internal capacitance≤ 40 nF
Effective internal inductance≤ 43 µH

Classifications

SystemClasscode
ECLASS 13.027274301
ECLASS 12.027274301
ECLASS 11.027270104
ECLASS 10.0.127270104
ECLASS 9.027270104
ECLASS 8.027270104
ECLASS 5.127270104
ETIM 9.0EC002544
ETIM 8.0EC002544
ETIM 7.0EC002544
ETIM 6.0EC002544
ETIM 5.0EC002544
UNSPSC 12.139121550

Details: MJ60-12GM-1N

Datasheet: MJ60-12GM-1N

DatasheetFile TypeFile Size
Datasheet MJ60-12GM-1NPDF127 KB
Fiche de données MJ60-12GM-1NPDF56 KB
Datenblatt MJ60-12GM-1NPDF90 KB
Hoja de datos MJ60-12GM-1NPDF46 KB
Datasheet MJ60-12GM-1NPDF58 KB

CAD+CAE: MJ60-12GM-1N

CADFile TypeFile Size
CAD 3-D / CAD 3-DSTP47 KB